- Gundam Plastic Model Kit 30th Anniversary campaign, Master Grade with transparent outer parts! The limited edition comes with an extra transparent outer part at the regular price. Enables enjoyment of the inner mechanical parts! Simple instruction included in a box! Z Gundam's wiki The MSZ-006 Zeta Gundam, designed by Kazumi Fujita, is a fictional weapon of the anime Mobile Suit Zeta Gundam from the Universal Century timeline of the Gundam metaseries. Its popularity has led to many variations, upgrades, redesigns and influenced later design works such as the Zeta Plus[2] and the Wing Gundam. It is also the only mobile suit having a real, pilotable, down-scaled, 7-metre-tall, hydraulically controlled model built. The name "Zeta Gundam" is the eponymous Gundam in which the suit appears, Mobile Suit Zeta Gundam, which is the sequel of Mobile Suit Gundam. The suit however is first deployed mid-series as a reinforcement suit. It was piloted by the series' main character Kamille Bidan until the end of the series. The Zeta Gundam also became the starting mobile suit of the main character Judau Ashta of the sequel Mobile Suit Gundam ZZ before he switched to the more powerful MSZ-010 ZZ Gundam. The Zeta Gundam eventually sustained heavy damage and was abandoned at the conclusion of the first Neo Zeon movement. The unit has also appeared in most of the Super Robot Wars game series, which is famous for featuring different mecha of many anime franchise together in one mixed story. Inside the Gundam franchise, it has been featured in the PlayStation game Gundam Battle Assault (Gundam: The Battle Master 2 in Japan), the PS2 game Mobile Suit Z Gundam: AEUG vs. Titans and PSP's Gundam Battle series. It is also one of the featured units in the March 2007 release of the PS3 and Xbox 360 game Dynasty Warriors: Gundam, a spin-off series of the Koei game Dynasty Warriors. Three variant units are also featured in Episode 9 of Gundam Evolve.[10] In the SD Gundam manga Double Zeta Kun kokoniari(ダブルゼ－タくんここにあリ, Little Double Zeta is here), Zeta Chan is the main female character, a girl version of Zeta with only the V antenna and the name recognizable. Source: http://en.wikipedia.org

This "ground pounder" carries a backpack (could hold a car) which opens for weapons storage. Cockpit armor panels fold down. Includes an unpainted figure of Pilot Shiroh Amada. The instruction book is 19 pages and includes a "Documentary photographs" page, and painting guides. Weapons include Beam Rifle, 10mm Machine Gun, Hyper Bazooka (Ground Type), Beam Saber and Shield.

Molded in the colors used in the classic "Mobile Suit Gundam" anime series. This version is identical to the MG RX-78-2 Gundam kit from 2005 except for the color and decal sheet for custom markings. This kit features the same incredibly flexible inner frame and sharply detailed armor. Includes with its signature weaponry including the beam rifle, hyper bazooka, Gundam hammer, two beam sabers, and shield. An unpainted in-scale pilot figure of Amuro Ray (molded in white) is included.

RX-79(G) Gundam Ground Type.  

MS-14S Gelgoog Char Custom Ver.2.0

Rare Item Limited Edition like PG Pearl Mirror Ver! Building starts with Bandai's world-famous "inner frame" system, designed to allow the final product to move and pose as it would in the original series; then the armour, including the wings are attached to the frame. Weapons included are the built-in machine cannons (in the shoulders), two Beam Sabres, and the Twin Buster Rifles. A custom display stand (unassembled and unpainted) is included so you can pose the finished mecha in any number of mid-flight poses, while keeping it safe. A super-tiny scale figure (unpainted) of Hiiro Yui is included as well. Foil stickers, clear stickers, and Bandai's very sharp dry-transfer decals, are included for adding detail to the model once built.

• The main MS from Mobile Suit Gundam 00 the Movie- Awakening of the Trailblazer has already been chosen for a Master Grade release! 
• Combination gimmick for the sword bits allows for a more accurate reproduction!
• Sword bits can be attached to the GN Sword V to create either the Buster Sword or Buster Rifle modes.
• The Bit A and Bit B combines to form a new weapon. (MG Original Gimmick)
• The pose with the Buster Sword armed looks great! Also comes with the Action Base
• (Black) to display with!
• Uses the GN Shield bits firing form as new mechanism.
• Each lens parts are clear, reproduced vividly. The letters that shows up, and the lines have
• been reproduced with laser processing and foil sticker.
• The GN-Drive at the chest has been reproduced with panel-line mold. The panel-line that
• creates a sense of machinery has been produced specifically for the development of MG.
• Accessories: GN Sword V, GN Shield, GN Sword Bit A/B/C, 1/100 Pilot Figure
• (standing/sitting), Action Base 2

- The difference between aircraft equipped with General : wing binders, with mega beam launcher,Change the color of the color forming part of the aircraft commander. - Supplier of linkage with the deformation mechanism to improve the proportions! - Sabre, of arms and grenade built to reproduce the mechanism of armed! - Opening and closing the hatch. Reproduction and internal Mekamorudo, MG dent made to provide details of the brand we all expect. - Accessories: mega beam launcher, beam saber × 2, Shield

RX-178 Gundam Mk-II (MG) A.E.U.G. Color

• The GP-03S gets the MG treatment and as usual the results are superb. Includes a folding bazooka, beam rifle, beam saber and folding shield. The core fighter is detachable. 
  
• Armor is detachable to expose the skeleton and hydraulics. Like all the kits in the MG series, the level of detail is superb, and virtually everything moves. 
  
• The rocket packs are moveable and the hatch opens on top to allow access to the beam sword. The shield folds up to be stored on the arm. The left arm opens and the claw extends outward. 
  
• Two types of hands are included -- fists, and posable (moving fingers). All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. 
  
• Of course, the use of cement and paints will improve the appearance of a finished model.
  

RX-178 Gundam Mk-II Titans

Here's another variation of Bandai's best-selling Master Grade Zaku kit. This version is based on the version originally seen in the "M.S.V." (Mobile Suit Variation) series. Besides the coloring, there are quite a few detail differences in the lower leg parts, weapons and markings of this Zaku. Weapons include the Giant Bazooka Prototype, standard Bazooka, "Heat Hawk" axe, and the sub-machine gun. This kit also comes with a figure of the pilot "Mush" (great name). Like all the kits in the MG series, the level of detail is superb, and virtually everything moves. The pipes running from the thighs to the calves, as well as around the sides of the head, are flexible springs covered with plastic tubes. The head has a panel that opens, and a small tab on the back of the head lets you position the Zaku's scanner eye. Three types of hands are included: open palm, fists, and posable (moving fingers). All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. Of course, the use of cement and paint will improve the appearance of a finished model.

RX-79(G) Gundam Ground Type (MG) (w Clear Kit)

A target model kit of the MG clear parts campaign to celebrate Gunpla 30th anniversary! Comes with 1 clear body parts runner. You can enjoy the inner structure through the clear body parts.

• Following EW ver. Death Scythe rated No.01 for item of most interest at the Tokyo Hobby Show MG booth, the Death Scythe Hell takes off! 
  
• Uses the XXX-G Frame developed during the animation!
  
• Marking work is designed by Hajime Katoki.
  
• Increased freedom of movement when set on Action Base, by the placement of joint at the wing connection part.
  
• New gimmick and mechanism equipped to the Active Cloak. By pulling from the base part of the wing, the internal machinery will appear. 
  
• Able to reproduce the flapping from the animation naturally. 
  
• The closed state of the Active Cloak can also be reproduced with a natural form. 
  
• Accessories: Beam Scissors, Active Cloak Technology & Combat Characteristics The Gundam Deathscythe was the "masterpiece" of Professor G. 
  

MS-09 Dom (MG)

• The first MG from Mobile Suit Gundam: 00, this long-awaited kit delivers on every level! 
  
• Thanks to advances in kit design, the inner frame moves along with the outer armor to recreate the Exia's unique range of motion! 
  
• GN Condensers on the arms/chest/legs are double-layered, clear plastic to reproduce the look of real lenses, giving it a more accurate appearance.
  
• Each GN Code piece throughout the body of the Exia is recreated in clear plastic to mimic the look of the Suit in the anime! 
  
• Includes custom marking seals and Gundam Decals.
  
• Includes GN Code decal sheet.
  
• GN drive completely reproduced. As with in the anime, the GN Drive can be removed
  
• stand included to hold the Drive while it's not with the Exia.
  
• Accessories: GN Sword x1, GN Long Blade x1, GN Short Blade x1, GN Beam Dagger x2,
  
• GN Beam Saber x2, GN Shield x1, 1/100 Setsuna F. Seiei figure x1

• "V operation" Gundam reinforced equipment for Gundam Ver.2.0 "G fighter" appears in a full spec. 
  
• The power reactor and the missile launcher unit of a new design are involved to B mechanism. 
  
• Gundam can become independent with stability according to the step of the tiptoe and the heel. 
  
• The caterpillar gives priority to the forming reproduction made of Pra, and reproduces various forms. 
  
• Accessories: 1 and shield × hyper hammer × one two kind of attachment for action base Landing gear ×1 expression and one Kiza ×1 and 1 and mass standing × row standing × two kinds of maintenance staff
  

• Mechanism of Zion threat. 
  
• The development story connected from mass production Zac to Gelgg is reproduced with the MG kit.
  
• Zac MS-06R of "Singh Matsnaga" specification of high mobile type Zac is made a kit by using the basic structure of Zac Ver.2.0 of the inner frame enhancement reproduction. The detail shape such as the leg, the shoulder, the shoulder armors, and forearms changes from MS-06R. 
  
• The Zac machine-gun, the Zac bazooka, the cartridge magazine in addition to the heat fork, and parts for the experimental bazooka modification are attached.
  

• Designed on the basic inner structure of the Zaku II Ver. 2.0, legendary Zeon ace pilot Johnny Ridden's custom Zaku II is added to the Zeon Master Grade lineup! 
  
• Features redesigned thruster housing and shoulder armor inspired by the Zaku II 06R.
• -  Monoeye -   camera movement gimmick allows for eye position to be changed.
• Separable spike elements set this kit apart from your standard Zaku. 
• Thanks to the updated power pipe assembly system, the once tedious process has been streamlined by using pre-positioned runners. 
• Cockpit hatch can be from the left or right, and cockpit can be shifted from right to left thanks to a lever gimmick. 
• Accessories: 120mm Machine Gun x1, Zaku Bazooka x1, Heat Hawk x1, Giant Bazooka x1, 1/100 Pilot Figure x2, Action Base Joint x1

• RX-178 Mk-II Ver.2.0 Titans
  
• We wouldn't have thought that Bandai could have improved on their Master Grade kit of the Gundam Mk-II (except, of course, with a PG version!), until we saw the Version 2.0
• Newly-designed joints allow it incredibly realistic posing; especially in the legs. A tighter bend at the knee, and a joint that divides the heel and toe of the foot, provides better balance for action poses, and gives your Mk-II a realistic appearance when it's crouching, as though it's about to spring into action at any time! 
• The kit is all molded in colour and snaps together; vinyl tubing is included for weapons detail. Also included are three scale figures (one pilot and two maintenance crew) for positioning around the Mk-II while it's "docked". Not just an improvement on the original kit, the Version 2.0 takes the Mk.II to a whole new level!
  

• Big beautiful version 2.0 Master Grade Zeta Gundam comes with a bazillion parts (yes, I'm too lazy to count them. 17 ABS runners, one base, plus polycaps) and goes together in the new fashion, with the super new joints at the waist and in the arms and legs, allowing it even more freedom of movement and incredible posing than ever before! 
  
• It's fully-transformable when completed, too. What more could you ask for? (well, a life-sized version would be nice, but you'd get tired just lifting the polycaps, trust me). 
  
• Shield and beam mega launcher weapons (as well as the regular rifle, beam sabres, etc.) are included, and a custom catapult stand is included to hold it all up -- with all the extra armour and weaponry, it'll be a little heavy when completed! Two unpainted pilots and an unpainted miscellaneous crew member are included. 
  
•  All parts snap together and are molded in colour so paint and glue for the kit are not necessary; foil stickers and clear Gundam stickers are included for detail. 
  
• However, if you'd like to paint it, it would look pretty spiffalicious, and a paint scheme is provided (paint is of course sold separately).
  

MG Freedom Gundam (Extra-Finish Edition)

• Best weapon can reproduce the cross-Sand Rock Crusher! - Combine the two bright show heat can also be a single weapon. Tell a cross-section shows Heat Crusher is left open to work. - Included beam machine gun! 
  
• Movable beam machine gun in stock and grip, can be transformed into storage forms.
  
• Accessories: shield, Huixiang x 2 Heat a large beam machine gun