PRODUCTS

Price Clear







Brand

Availability

Showing 181 - 210 of 4117 products

Quick View
img
SAVERM81.86

[Star Wars] 1/72 Y-Wing Starfighter

[Star Wars] 1/72 Y-Wing Starfighter

  • Accessories: Death Star surface-based, laser effect parts, the same scale pilot figure x 3 (upright x 1, seated x 2 types), the same scale astromech droid x 2 species, canopy x 2 species (frame parts, clear parts ), Chakuyukaashi

RM122.00
RM122.00 Add to cart
Quick View
img
SAVERM9.90

[Builder Parts] 1/144 MS Spike 02

[Builder Parts] 1/144 MS Spike 02


Includes:
4 Different Spikes x 2 each
Base Seed x 8

Item Size / Weight 24.4 x 17 x 2.3 cm / 30g

RM20.00
RM20.00 Add to cart
Quick View
img
SAVERM14.90

[Builder Parts] 1/144 MS Hand 03 (Federation/S Size)

Set of hand parts for customizing your GunPla! Comes with closed fist, open palm, and grasping hands designed for Zeon related mobile suits.

Enhance your Mobile Suit Gundam model kit collection with these Builders Parts hands! They are molded in color, requiring little to no paint to achieve a finished look.

RM21.00
RM21.00 Add to cart
Quick View
img
SAVERM9.09

Metal Alligator Clips with sticks for Spray works (10 units 1 set)

  • Metal Aligator Clips with wood sticks for Spray works 
  • Metal Aligator Clips comes with black colour glove around.
  • useful when you need an extra hand to hold the plastic model parts for spray.
  • 10 units in 1 set with affordable price; hurry to purchase while stock lasts.

RM8.90
RM8.90 Add to cart
Quick View
img
SAVERM10.48

Tommy Takara Diecast vehicle - #117 MITSUBISHI I-MIEW

  • Takara Tomy Tomica die cast series. 
  • Suitable for 3 years & above.
  • Mitsubishi i-MIEW diecast vehicle.

RM13.50
RM13.50 Add to cart
Quick View
img
SAVERM10.48

Tommy Takara Diecast vehicle - #104 TOYOTA VITZ

RM13.50
RM13.50 Add to cart
Quick View
img
SAVERM10.48

Tommy Takara Diecast vehicle - #92 TOYOTA RACTIS

RM13.50
RM13.50 Add to cart
Quick View
img
SAVERM3.99

MODO M-004 Royal Blue 18ML

  • contains 20ml
  • basic color: MODO Royal Blue M-004 20ML
  • mixed together with lacquer thinner for model kit painting.

RM14.00
RM14.00 Add to cart
Quick View
img
SAVERM3.99

MODO Pure Yellow M-005 18ML

  • contains 18ml
  • MODO Pure Yellow M 002 18ML
  • mixed together with lacquer thinner for model kit painting.

RM14.00
RM14.00 Add to cart
Quick View
img
SAVERM3.99

MODO Flat Coat M-006 18ML

  • contains 18ml
  • MODO Flat Coat M-006 18ML
  • mixed together with lacquer thinner for model kit painting.

RM14.00
RM14.00 Add to cart
Quick View
img
SAVERM3.99

MODO Forest Green M-013 18ML

  • contains 18ml
  • MODO Forest Green M-013 18ML
  • basic color.
  • mixed together with lacquer thinner for model kit painting.

RM14.00
RM14.00 Add to cart
Quick View
img
SAVERM3.99

MODO Clear Sky Blue M-044 18ML

  • contains 20ml
  • clear color
  • MODO Clear Sky Blue M-044 18ML
  • mixed together with lacquer thinner for model kit painting.

RM14.00
RM14.00 Add to cart
Quick View
img
SAVERM3.99

MODO Clear Green M-048 18ML

  • contains 18ml
  • MODO Clear Green M-048 18ML
  • mixed together with lacquer thinner for model kit painting.

RM14.00
RM14.00 Add to cart
Quick View
img
SAVERM5.09

MODO Clear Royal Blue M-049 18ML

  • contains 20ml
  • clear color.
  • MODO Clear Royal Blue M-049 20ML
  • mixed together with lacquer thinner for model kit painting.

RM12.90
RM12.90 Add to cart
Quick View
img
SAVERM10.98

MODO MX-07 BRONZE GOLD 18ML

  • contains 18ml
  • metal color
  • MODO BRONZE GOLD MX-07 18ML
  • mixed together with lacquer thinner for model kit painting.

RM19.00
RM19.00 Add to cart
Quick View
img
SAVERM8.90

Water Decal for MG 1/100 00 QAN[T] Gundam

- Water Decal for MG 1/100 00 QAN[T] Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM6.97

MODO D-08 Retarder Max (250ML)

  • contains 250ML
  • used to mix with thinner and paints to slow down drying time. 
  • used in metallic paints to achieve smooth surface.
For those who still don't know how to use Modo for hand painting.
Here's the tip, mix your lacquer base paint (especially Modo paint) with D-08 Retarder Max. It is the best solvent to slow down the drying time and reduce the chances of leaving brush stroke.

RM35.00
RM35.00 Add to cart
Quick View
img
SAVERM8.90

Water Decal HG Beargguy III

- Water Decal for HG BEARGGUY III water decal
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM8.90

Water Decal HG 1/144 00 QAN[T] Gundam

- Water Decal for HG 1/144 00 QAN[T] Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM8.90

Water Decal for MG 1/100 GAT-X103 BUSTER Gundam

- Water Decal for MG 1/100 GAT-X103 BUSTER Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM19.98

Metal Alligator Clips with sticks for Spray works (20 units 1 set)

  • Metal Aligator Clips with wood sticks for Spray works 
  • Metal Aligator Clips comes with black colour glove around.
  • useful when you need an extra hand to hold the plastic model parts for spray.
  • 20 units in 1 set with affordable price; hurry to purchase while stock lasts.

RM16.00
RM16.00 Add to cart
Quick View
img
SAVERM26.97

Metal Alligator Clips with sticks for Spray works (30 units 1 set)

  • Metal Aligator Clips with wood sticks for Spray works 
  • Metal Aligator Clips comes with black/red colour glove around.
  • useful when you need an extra hand to hold the plastic model parts for spray.
  • 30 units in 1 set with affordable price; hurry to purchase while stock lasts.

RM21.00
RM21.00 Add to cart
Quick View
img
SAVERM299.64

HS08 Mini Airbrush Compressor (Piston Type) Combo with Air brush Pen (Free Basic Painting Tools)


  • Suitable for air brush 0.2mm - 0.5mm 
  • Auto start and stop function
  • Air pressure adjustable
  • Airbrush pen, 2 leg AC adapter (Input AC100~240V 50/60HZ 0.6A)
  • Auto start: 15psi
  • Auto stop: 25psi
  • Working pressure: 2- 15psi
  • Air flow : 10.5L / min
  • Airbrush pen type: Double Action Airbrush pen
  • 360 degree circumvention airbrush holder, for your convenient work
  • Package include Air humid filter
Free Basic Beginner Essential Painting Tools
  • 1 pair of Rubber Gloves
  • 1 x Paint Fine Tip Paint Brush
  • 1 x Paint Mixing Spoon
  • 2 x Paint Mixing Bottle 
  • 3 x Measuring Cups
  • 4 x Eye Dropper
  • 1 x 6 mm Masking Tape
  • 1 x Cotton Bud (50+ pcs)
  • 3 x Metal Dish
  • 10 x Alligator Clips

RM240.00
RM240.00 Add to cart
Quick View
img
SAVERM10.90

Tamiya Liquid Surface Primer 40ml - White

  • The currently available Liquid Surface Primer is highly useful for filling seam lines and smoothing over scratches in small or difficult to reach areas since it can be applied with a modelling brush. However, since some modellers have found it difficult to paint over it with a lighter color, we now release this white-colored version of the liquid primer to solve this problem. 
  • You can also thin out the primer with Tamiya Lacquer Thinner for convenient application with airbrushes. Each bottle contains 40ml.

RM25.00
RM25.00 Add to cart
Quick View
img
SAVERM10.98

Tamiya Liquid Surface Primer 40ml - Gray

  • In order to smooth over small scratches etc., many modelers have created their own liquified putty by dissolving putty with lacquer thinner. Tamiya now makes this process a whole lot easier by releasing our very own liquified putty, Liquid Surface Primer. Just brush on over scratches, rough areas etc. and you will get that perfect smooth finish.
  • Applies easily to small areas using a modeling brush
  • Can be used on plastic, metal and wooden models
  • Can be further diluted using Tamiya Lacquer Thinner, allowing it to be used in airbrushes.
  • 1 bottle contains 40ml

RM25.00
RM25.00 Add to cart
Quick View
img
SAVERM3.98

Tamiya Color Acrylic Paint X-15 (Light Green) (23ml)

Tamiya Acrylic Paints are made from water soluble resins that are excellent for either brush or spray painting. They have excellent coverage and can be used on resin, styrofoam, wood, fiberglass and all common model plastics. The paint flows smoothly with no blushing or fading and colors can be blended very easily to achieve that realistic finish to bring your scale model to life.

Each bottle of Tamiya Acrylic Paints contains 23ml and there is a wide range of gloss, flat and translucent colors. There is also an exclusive thinner and flat base which when added to one of the gloss colors will turn it into a satin or flat finish depending on how much you use.

Specs:
Color Code: X-15
Type: Light Green
Volume: 23ml

Tips:
- When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.
- X designated colors have a glossy finish while XF designated colors are flat finish.
- The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
- The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer - Thinner will yield faster drying results and a harder finish.
- For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.

RM20.00
RM20.00 Add to cart
Quick View
img
SAVERM22.00

Mr Hobby Mr.Tools Mr.Nipper II Cutter MT104 ( Hobby Tools )

Entry level sprue cutter


Mr. Nipper is a dual-sided, all purpose, pre-lubricated cutting tool from Mr. Hobby. Featuring a spring-assisted reopening of the handles, and a comfortable curvature of the hand grips,  Mr. Nipper is going to be the cutting tool that makes cutting plastic feel rewarding. The blades are angled slightly upwards and are flat faced, giving you a guaranteed clean cut that gives a "snappy" response, rather than the nipper "chewing" through the gates. The added pressure also reduces the amount of discoloration where it was cut.

RM56.00
RM56.00 Add to cart
Quick View
img
SAVERM22.97

Tamiya Panel Line Accent Color - Gray

Tamiya Panel Line enamel paints are ideal for highlighting panel lines and other details to give your model a more realistic depth. The paint has been pre-diluted into the ideal viscosity and can be easily applied into crevasses such as panel lines with the brush on the bottle cap. Once dried, any excess may be cleaned up by using enamel thinner. (Bottle contains 40ml)

Note:
Plastic parts may become brittle when using Tamiya Panel Line accent colors. Avoid using on movable parts and take care when applying to load-bearing areas. Apply over base coat of lacquer or acrylic paint. Accent Color paints may damage underlying base coat. Test before applying it onto the model. Take care when applying on flat base coat colors as Accent Color paints may permeate more readily.

RM25.00
RM25.00 Add to cart
Quick View
img
SAVERM9.00

Topup for exchange or add new items

Topup for addin new or exchange item into the existing order.

RM1.00
RM1.00 Add to cart
Quick View
img
SAVERM11.90

MODO Phantom Gold MK-37 20ML

  • contains 20ML of lacquer paint
  • COLOR: phantom gold MK-37
  • apply a dark black/gray surfacer such as MK-11 / MK-12 as first layer before applying the phantom paint.
  • after the surface is smooth u may mixed with MODO retarder max + any phantom series paint to make the surface gloss & shinny.

RM38.00
RM38.00 Add to cart

Showing 181 - 210 of 4117 products