Price Clear







Gundam Model Kits

Showing 1201 - 1230 of 2757 products

[EW-07] HG 1/144 Gundam Sandrock Custom
SAVERM15.90

[EW-07] HG 1/144 Gundam Sandrock Custom

This version of the Sandrock as used in "Endless Waltz" features heat shotels with interchangeable handles to be stored on the backpack as well as an original shield to perform the "Cross Crusher" attack. An additional torso is provided to allow for more expressive sword poses.

RM32.00
[EW-03] HG 1/144 Gundam H-Arms Custom
SAVERM10.70

[EW-03] HG 1/144 Gundam H-Arms Custom

Heavy arms Custom features its signature double twin Gatling guns as well as a full plethora of micro missile pods. Missile hatches on shoulders swivel open while leg missiles use replacement parts to simulate open and closed hatches.

RM37.20
HG 1/100 Gundam X Divider
SAVERM41.80

HG 1/100 Gundam X Divider

  • The GX-9900-DV Gundam X Divider (aka Gundam X Divider, X Divider) is a custom modified version of a GX-9900 Gundam X in the After War Gundam X. It is initially piloted by Garrod Ran, but is later piloted by Jamil Neate after Garrod traded-up for GX-9901-DX Gundam Double X.

RM72.00
[379] SDBB Delta Plus
SAVERM19.90

[379] SDBB Delta Plus

  • It can be transformed into WR form from MS form by replacing the parts. 
  • The eye expressions can be chosen from two types. 
  • The base jabber type stand is included. 
  • Includes a clear stand to display Delta Plus alone. 
  • runner x8, foil sticker x1, instruction manual x1
Item Size/Weight : 31 x 20.2 x 5.7 cm / 262g

RM52.00
[380] SDBB Unicorn Gundam 02 Banshee
SAVERM21.90

[380] SDBB Unicorn Gundam 02 Banshee

  • Accessories: Armed Armor BS, Armed armor VN, beam saber

RM50.00
[382] SDBB Sazabi
SAVERM17.96

[382] SDBB Sazabi

  • Designed after the modern version of the iconic Sazabi, this eagerly-awaited BB kit is renewed for the first time in 25 years!
  • Detail reproduction escape pod!
  • Includes funnel ejection effect parts!
  • Comes with Tomahawk beam effects!
  • Gimmick allows mono eye to move from side to side!
  • Funnel container recreated.
  • Includes huge beam-Shot rifle!
  • Beam tomahawk mounts to shield!!
  • Accessories: Beam-Shot Rifle, Shield, Beam Tomahawk (with Beam Effect),
  • Three Ejected Funnels, Funnel Ejection Effect Parts
Item Size/Weight : 31 x 20.2 x 5.7 cm / 240g

RM42.00
[381] Legend BB Zakuto, Yami Shogun (SD)
SAVERM19.90

[381] Legend BB Zakuto, Yami Shogun (SD)

  • Accessories: armor sword (circle lightning), Artillery dark, dark sword, the darkness

RM40.00
[024] HGUC 1/144 RMS-141 Xekueins Gundam
SAVERM25.90

[024] HGUC 1/144 RMS-141 Xekueins Gundam

  • The RMS-141 Xeku Eins (Type 3 Armament) is a heavy attack version of the Xeku Eins. Originally intended for attacking and defending space fortresses, this type is armed mainly with projectile weapons. Its main weapon is a large 120mm machine gun with a rate of fire of 360-540 rounds per minute, and it carries roughly 6,000 rounds of ammunition in each of the huge drum magazines attached to its shoulders. The mobile suit is also equipped with a pair of shields that connect to the movable frame mounts in its shoulders, and these shields in turn provide beam saber racks and latches for optional equipment such as clay bazookas, bazooka magazines, and smoke dischargers. This is effectively the standard configuration of the Xeku Eins. The pilots of the instructor corps use this version to wipe out the regular Federation Forces mobile suits stationed at Pezun, and after declaring themselves the New Desides, they continue using it throughout the Pezun Rebellion of UC 0088.

RM70.00
[033] HG 1/144 Kyrios Gundam Trans-Am Mode
SAVERM29.90

[033] HG 1/144 Kyrios Gundam Trans-Am Mode

GN-003 Gundam Kyrios Trans-Am Mode
Item Size/Weight : 31 x 19 x 7.2 cm / 337g

Gundam Kyrios from the first season of "Mobile Suit Gundam 00" makes a return flight back to Bandai's HG lineup with the release of this gloss injection-molded kit, which comes molded in colors that mimic its Trans-Am mode color scheme seen in the show! Similar to the 2007-released HG Gundam Kyrios but with a different color scheme, it will be articulated with plenty of polycap joints upon completion and can switch between MS Mode and Flight Position. Weapons include a GN beam submachine gun and a GN shield that can be converted into a claw.

RM60.00
MG 1/100 Gundam Age-2 Double Bullet
SAVERM119.20

MG 1/100 Gundam Age-2 Double Bullet

  • Appearing in Gundam AGE, the Age-2 Double Bullet has evolved the Age-2 designs even further! 
  • The Double Bullet, an evolution of the Gundam AGE-2 appears as an the MG! Designed with a complete inner frame and all the unique characteristics of Master Grade AGE kits.
  • Transformation mechanism is also reproduced, along with all the details you expect from a modern Master Grade kit. 
  • Twin DODS Cannons included with blade and beam parts in order to reproduce iconic scenes from Gundam AGE!
  • Includes calf missile deployment gimmick.
  • A truly gimmick-based MG, the cannon's position can be changed to be fired while being held or not, and can be separate from the shoulder mounts to be used like standard DODS Rifles. 
  • Transformation gimmick included to shift into flight mode! 
  • Also includes scale Asemu figures.
  • Accessories: Twin DODS Cannon x2, Calf Missile x2, Beam Saber x2,
  • Pilot Figure (Sitting, Standing)

RM132.70
[026] HGUC 1/144 MS-14Fs Gelgoog Marine (Cima Custom)
SAVERM37.40

[026] HGUC 1/144 MS-14Fs Gelgoog Marine (Cima Custom)

Item Size/Weight : 31.2 x 19.1 x 8.2 cm / 375g

RM51.50
[017] HG 1/144 Al-Saachez`s AEU Enact Custom Agrissa Type
SAVERM21.70

[017] HG 1/144 Al-Saachez`s AEU Enact Custom Agrissa Type

Here's a sharp snap-fit plastic kit of Ali Al-Saachez's AEU Enact Custom Agrissa Type variable Mobile Suit that will be fully transformable upon completion! Capable of switching between MS Mode and Flight Position, this color-molded kit is packed with a blade rifle with slide-out blade, a defense rod that can be attached to either side of its arm, a sonic blade (plasma sword), and a missile launcher.

RM38.20
[030] HG 1/144 Gadessa
SAVERM30.60

[030] HG 1/144 Gadessa

A mobile suit used by Innovades, the Gadessa features a long range Mega Launcher cannon weapon that can unfold like in the Gundam 00 TV series second season. A display stand is included.

RM58.30
[018] HG 1/144 GNX-603T GN-X
SAVERM23.90

[018] HG 1/144 GNX-603T GN-X

A high grade of the mass produced Gundams in Gundam 00. Features GN beam rifle with interchangeable barrel for long range type, beam sabers and arm mounted shield.

RM48.00
[023] HG 1/144 GN-X III A-Laws Type
SAVERM23.60

[023] HG 1/144 GN-X III A-Laws Type

Action base is not included.


A refined GN-X, this unit features a new lance like weapon that can act as both a gun and melee weapon. GN pistol and GN beam sabers also included.

RM48.30
[EW-7] HG 1/100 Serpent Custom
SAVERM39.90

[EW-7] HG 1/100 Serpent Custom

Small-scale version of the mecha from the OVA (Original Video Animation) series "Gundam Wing: Endless Waltz." Chest and shoulder hatches open. Comes with gattling guns and beam cannon (includes three versions of the hands, some for gripping weapons). Specifically designed to be able to be posed in some of the more memorable ways it was seen in the series. Snap-assembly, fully-posable and molded in color. Note, however, that many of the smaller details are NOT in their "real" colors and painting this model will make it look much better. About 12cm tall when completed.

RM80.00
NG 1/60 Strike Gundam
SAVERM76.90

NG 1/60 Strike Gundam

The first entry in Bandai's 1/60 Big Scale Real Detail series, Gundam Seed's star mecha Strike Gundam launches this new line of kits in fine style!

Highly posable–even its fingers are jointed–this kit has nice detail, snap assembly, and a full-color, lavishly illustrated instruction booklet that make the assembly process a breeze. Among the niceties are a cockpit that opens to reveal pilot Kira Yamato, and side armor that opens at the hip to stow both Armor Schneider knives. The requisite beam rifle and shield are included, too.

Molded in Bandai's patented multi-gate technology which allows multiple colors on one tree. Stickers are included for the details that aren't molded in color. The parts are pre-colored, but painting will greatly enhance its appearance.

High grade, 1/60 scale Gundam SEED model kit.

RM132.00
NG Shining Gundam
SAVERM64.30
RM115.60
NG 1/60 Strike Gundam SWS
SAVERM159.60

NG 1/60 Strike Gundam SWS

This kit includes all the parts for the 1/60 Strike Gundam, previously released, but also comes with the spectacular backpack unit which turns it into the Aile Strike, as well as two other optional weapons (for Sword and Launcher) to let you play with it in a total of four different modes! 


Great engineering lets this figure duplicate some spectacular action poses, and with this many different weapons to swap in and out, you'll never run out of new things to do with it. 

Parts are for ONE robot, with numerous optional add-on systems.

RM260.30
Bandai NG 1/60 RX-78-2 Gundam
SAVERM39.90

Bandai NG 1/60 RX-78-2 Gundam

Bandai NG 1/60 RX-78-2 Gundam

RM80.00
Bandai NG 1/60 MS-06S Char's Zaku
SAVERM25.40

Bandai NG 1/60 MS-06S Char's Zaku

Bandai NG 1/60 MS-06S Char's Zaku

RM94.50
[010] HG 1/144 RMS-099 Rick Dias Mass Production
SAVERM34.90

[010] HG 1/144 RMS-099 Rick Dias Mass Production

Along with the Hyaku-Shiki (Type 100), the Rick Dias is one of the most popular mecha from Zeta Gundam as it was designed by Mamoru Nagano of L-Gaim and Five Star Stories fame. This new kit does it justice, featuring overall slimmer, sharper proportions than the chunky High Complete Model or 1/100 kit of many years ago. As usual for kits in the High Grade series, it's molded in color, features snap assembly, and has poly-caps for all the moving joints.

RM49.00

Showing 1201 - 1230 of 2757 products

Contact Us