HGUC 1/144 RX-0[N] Unicorn Gundam 02 Banshee Norn [Destroy Mode] Theatrical Limited NT-D Clear Ver.

BB Unicorn Expo Version

- Dry Suit Gundam UC Center edition of HGUC finally!
- UC, of course, ZZ was at arms also included!
UC Gundam comes armed with a bazooka and the heat was at saber. ZZ appeared in more Tomahawk beam, the beam is attached Lancer. The beam section is a clear reproduction.
- Beam Gatling reproduced!
Gatling reproduction is characteristic of the sensor inside the drive sleeve. The slide mechanism is also reproduced by the replacement cover.
- Reproduce Toraiburedo!
The back is equipped with three armed Toraiburedo center dedicated dry. Stored state, each state included three deployments.

- Accessories: bazooka, heat saber, beam tomahawk, beam Lancer, fist (right)
Have the manual grip (left), Toraiburedo (Stuffed expanded state) x— 3 each

- Unicorn Gundam Unicorn mode and Destroy mode are both released at the same time! Unicorn Gundam Unicorn mode is No.101 of HGUC - By eliminating the transformation gimmick between unicorn mode and destroy mode, a higher quality and proportion has been obtained. - By replacing the parts that moves in the anime, the image of transformation has been emphasized without actually transforming. - Uses the PS material that doesn't contain ABS, great for paint users. - Use of new type polycap allows increased posing range. - Includes: Shield (Closed) x1, Beam Saber (with beam) x2, Hyper Bazooka (Closed) x1

• Novel version [Gundam UC] The Full Armor Gundam unicorn appeared in the late Master Grade! Fukui the author said , with the cooperation of Mr. Katoki (a mechanical designer), adding new weapons to the Unicorn. A number of packed with gimmicks to reproduce the militants.?
• Includes armed 27 ++ Beam rifle, bazooka, and hand grenades, armed supplied All nine, 27 items + + equipped with all available weapons!?
• Armed rich, can be fitted together. Beam rifle, hyper bazooka, Grenade launcher, etc. You can even hand. In addition, hyper bazooka can be fitted to concentrate on other weapons.?
• Hyper Beam Javelin Armed new design! New design based on the image of Mr. Fukui Javelin was hyper beam. Exposure, such as the psycho-frame, with a large number of gimmick.?
• Backpack equipped with arms for extra frame. Inset from the bottom of the backpack Folding arm joint so crowded, you can hold firmly.?
• Besides the shield left and right arms, the back is also equipped ships with a total of three pieces.?
• Comes with a stand to support the huge back thrusters. In heavily armed, and well Can be displayed. - Accessories: Beam Rifle x 2, saber x 2, bazooka x 2, hand grenades x 4, Missile Launcher with Grenade Launcher x 2 x 2,3, heat saber x 4, shield x 3, Gatling Gun x 6, Hyper Beam javelin x 2, only joint action based Figures x 4, support stand thruster expression x 1, Secret Parts.

• BB-360 Unicorn Gundam
• BB-360 Unicorn (Expo Version)
• RX-0 Unicorn Gundam 02 Banshee (MG)
• ?
• Unicorn Gundam 02 Banshee (Unicorn Mode)
• [134] Unicorn Gundam 02 Banshee (Destroy Mode) (HGUC)
• RX-0 Unicorn Gundam HD Collar +MS CAGE
• RX-0 Unicorn Gundam Destroy Mode
• Unicorn Gundam Destroy Mode Titanium Finish
• RX-0 Full Armor Unicorn Gundam Ver.Ka (MG)
• RX-0 Unicorn Gundam (MG)
• RX-0 Unicorn Gundam Ver.Ka

• Accessories: Magnum Sword, Akashic da Vine, has included other parts
  

1/144 HGUC Unicorn Gundam Destroy Mode (Pearl Clear) version or Theater version. Limited units only

• The RX-0[N] Unicorn Gundam 02 Banshee Norn (aka Banshee Norn) is an upgraded variant of the RX-0 Unicorn Gundam 02 Banshee that appears in the OVA version of Mobile Suit Gundam Unicorn. The unit is piloted by Riddhe Marcenas.
• Accessories: Beam Magnum (with revolving launcher), beam Jytte, Armed Armor XC (expanded state), Armed armor DE (unfolded state), ( -  ?? no blade) x? 4, rifle handle, grip hand x? 2 (left and right) beam saber.

HGUC 1/144 Unicorn Gundam [Destroy Mode Green Frame Ver.] Gunpla Expo World Tour 2012 Exclusive

• The RX-0 Unicorn Gundam 03 Phenex is a mobile suit that appeared in Mobile Suit Gundam UC: One of Seventy Two, a short animation feature at Gundam Front Tokyo's "DOME-G" on August 3, 2013. It is based off a short story written by Gundam Unicorn's author, Fukui Harutoshi. To celebrate this short animated feature, Bandai Hobby produced a limited Gundam Front Tokyo HG model kit of this design.
  

• From Mobile Suit Gundam Unicorn comes the titular suit in its Full Armor configuration!
  
• Armed Armor DEs can be mounted separately or in their tri-weapon formation using included display stands!
  
• Psycho frame is molded in clear green part to create the Awakened Unicorn Gundam!
  
• Beam Gatling Guns are included to complete the Armed Armor DEs!
• Accessories: Hyper Bazooka x2, Beam Magnum, Beam Saber (Hilt) x4,
  
• Beam Saber (Blade) x2, Anti-Ship Missile x2, Grenade Launcher x2,
  
• Hand Grenade Rack x4, Beam Gatling Gun x6, Shield, Armed Armor DE x3, Large Booster x2, Grip Manipulator x2 (Left and Right)

• The transformation from Unicorn Mode to Destroy Mode including the opening of the face guard can be perfectly recreated. 
• The entire red Psycho Frame is made with a unique light-focusing resin. 
• A magnet is inserted in the Blade Antenna, which can be opened and closed during the transformation, in order to keep the antenna beautifully in Unicorn Mode. The interior of the antenna, which is exposed in Destroy Mode, is gold. 
• The range of movement of the elbows and knees is broadened to the utmost limit, without damaging its appearance. 
• Includes a lot of weapons such as a Beam Magnum, a Hyper Bazooka and Beam Gatling Guns. 
• The Beam Gatling Guns can be combined with the Shield and worn on its leg. 
• A display stand is included to allow a wide range of weaponry to be displayed together with the Mobile Suit. Set the MS on the pillar of the stand and enjoy its dynamic poses which are special and unique to 1/60 scale. 
• Figures of Banagher Links, standing and sitting, are included. 
• Original marking stickers for the kit are included. 
• Psycho Frame emits UV lights by incorporating the LED Unit for PG 1/60 RX-0 Unicorn Gundam, sold separately. 
• Runner 47, Slide mark x1, Foil sticker x1, Instruction manual x1 

• Latest news : Shipment has arrived.
• This is completed set of PG Unicorn Gundam + LED Set at super saver price!
  
• PG Unicorn Set:
  
• Fully transformable (Face guard "expansion" included)
  
• "Third form" realized
  
• Red psychoframe in special glow plastic
  
• "Transformation" uses magnet in antenna; Interior of the antenna is gold color
  
• Articulation of the elbow and knee joints able to perform a wide range of movements
  
• Psycho frame UV emission by incorporating a dedicated LED unit (sold separately)
  
• Accessories: Shield, beam magnum, beam Magnum for spare magazine, beam Gatling gun x— 2, saber x— 4 (beam parts x— 2), hyper-Basuka, dedicated display base, 
  
• LED Unit:
  
• A set of LED units to be UV emitting [PG 1/60 RX-0 Unicorn Gundam]
  
• For use with Psychoframe with 29 LED units, and one for the eyes, making the total 30 LED units
  
• Height Approx: 361mm
  
• This is pre-painted plastic model kits and require snap-fit assembly only.
  

The gold Phenex comes as a BB Senshi. - The 2 Armed Armor DEs, which are the chief distinction of Phenex, have openable gimmicks and can be equipped with a backpack through joint parts. - Has gimmicks to transform from the Unicorn mode into the destroying mode. - Includes two kinds of stickers for the camera eyes besides marking stickers. - Its distinctive gold appearance is reproduced with molded color. The blue of Psycho Frame is reproduced with blue clear parts. - Kit includes runner x9, foil sticker x1 & instruction manual x1.

Banshee Head Display Base.

Suitable for [134] / [135] / [153] 1/144 HGUC Unicorn Gundam 2 Banshee Norn kit

1/144 HGUC Unicorn Gundam 2 Banshee Norn (Unicorn Mode) kit isNOT included.

Special Edition Gundam HG RX-0 Unicorn Gundam (Unicorn Mode) 1/144 Scale Model Kit with 1/48 Scale Head Display Base from Bandai.

The classic display base for all your 1/100 kits, but with a Unicorn twist! This one is cast in an intimidating combo of white and black to perfectly complement the Unicorn Gundam! Included a piece of Unicorn Sticker for extra touch up.

• This is completed set of PG Unicorn Gundam +  FULL ARMOR EXPANSION UNIT FOR PG UNICORN 2 in 1 combo
  
• PG Unicorn Set:
  
• Fully transformable (Face guard "expansion" included)
  
• "Third form" realized
  
• Red psychoframe in special glow plastic
  
• "Transformation" uses magnet in antenna; Interior of the antenna is gold color
  
• Articulation of the elbow and knee joints able to perform a wide range of movements
  
• Psycho frame UV emission by incorporating a dedicated LED unit (sold separately)
  
• Accessories: Shield, beam magnum, beam Magnum for spare magazine, beam Gatling gun × 2, saber × 4 (beam parts × 2), hyper-Basuka, dedicated display base
• Height Approx: 361mm
  
• This is pre-painted plastic model kits and require snap-fit assembly only.

• The head has transformation structure. The antennas on the head have magnet inside to hold them together in Unicorn Mode. 
• In the state of "unchained", armor all over the body opens and maximally reveals the Psycho Frames. Psycho Frames are made with clear material. 
• The lion's mane like Armed Armor XC is recreated with gold-color molding. The Psycho Frames are also made with clear material. 
• The same range of movement as Unicorn Mode is maintained even in Destroy Mode. The kneeling pose can be recreated. 
• The Revolving Launcher can be attached to the lower barrel of the Beam Magnum. The Beam Jutte, is recreated with clear parts. 
• The Armed Armor DE and Beam Sabers are included. The Armed Armor DE has unfolding gimmicks and can be mounted on the back. 
• The spare magazines of the Beam Magnum and Revolving Launcher can be attached to the hip. 
• Weapons can also be displayed with included display base. The base has an elastic support post to enable the MS to make dynamic poses. 
• Riddhe Marcenas figures (standing and seated) are included. 
• Includes original marking stickers. 
• Runner x58, Tetron sticker x1, Foil sticker x1, Instruction manual x1

• Metal Build Alloy Inner Frame for 1/100 MG Unicorn Gundam
  
• The original Unicorn Gundam design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
• Through the package modification, the effect of the finished diecast MG Unicorn Gundam model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
• However, this modification does not completely solve all the problems of the original.

QY SD Unicorn Mecha Perfectibility

Daban 6639 MG 1/100 Unicorn Banshee 02 Gundam 

[Bandai] Mobile Suit Gundam Unicorn Multiuse 1 (GD107)