• Home
  • Gundam Model Kits

PRODUCTS

Price Clear







Brand

Availability

Gundam Model Kits

Showing 31 - 44 of 44 products

Quick View
img
SAVERM103.90

MG V-Dash Gundam Ver.Ka

  • Runner x24, Foil sticker x2, Marking sticker x2, Tetronic sticker x2, Instruction manual x2 
  • "V Dash Gundam" as a fully equipped V Gundam Ver.Ka is released. Includes additional equipments such as the "Core・Booster". 
  • Includes two V Head Core Fighters and two Hexa Head Core Fighters. The Core Fighter, Top Fighter, Bottom Fighter, Core・Booster, all four flight mode can be made with a single package. 
  • The Overhung Cannon of Core・Booster becomes a big beam cannon by being attached onto the MS back. 
  • Includes two beam rifles which can be attached to the hard points. 
  • The beam cannon which is attached to the side armor, the missile pod, the two disposable buzzes on both sides are included. 
  • Includes the gatling gun, beam javelin, beam smart gun. 
  • Includes colored parts for foot covers for reproducing V Gundam Hexa. 
  • Includes special joint parts for the action base.

RM216.00
RM216.00 Request Stock
Quick View
img
SAVERM99.90

MG 1/100 RX-0 Unicorn Gundam Ver.Ka

Veteran mecha designer Hajime Katoki again brings his style to Bandai's popular Master Grade (MG) series, this time with his design of Unicorn Gundam! The titular mecha from the "Mobile Suit Gundam Unicorn" serial novel comes sharply molded on colored runners and is capable of being switched between Unicorn Mode and Destroy (NT-D) Mode. In Unicorn Mode, the all-white Mobile Suit has a horn projecting from its forehead that resembles that of the mythical creature for which it was named. When switching to NT-D Mode, its armor slides open to reveal its psychoframe, the four blades on the shield expand outwards, its unicorn horn opens, and a Gundam face is revealed. Its armaments include four Beam Sabers, a Beam Magnum, Hyper Bazooka, and a shield. Sheets of foil stickers, Gundam decals, and marking stickers are included.

RM200.00
RM200.00 Request Stock
Quick View
img
SAVERM159.60

MG 1/100 MSN-06S SINANJU Ver.Ka

  • The enemy of the white Unicorn Gundam, the Full Frontal’s Sinanju enters the Master Grade lineup! 
  • Produced by master designer Hajime Katoki, this kit is a stunning rendition of one of Gundam’s most striking Suits!
  • -Multilayer armor parts, redesigned weapons and moving thrusters show off a high level of quality. 
  • Cockpit hatch features a full internal closure system as well as a detailed 1/100 Full Frontal figure, as well as intricate ‘Sleeves’ embellishments across the surface of the Suit. 
  • Accessories: Beam Rifle x1, Shield x1, Beam Tomahawk x1, Beam Saber x2, Grenade Launcher x1, 1/100 Pilot Figure x2, Action Base Joint x1

RM260.30
RM260.30 Request Stock
Quick View
img
SAVERM40.50

MG 1/100 RB-79 Ball Ver.Ka (30th Anniversary)

- Gundam Plastic Model Kit 30th Anniversary campaign, Master Grade with transparent outer parts! The limited edition comes with an extra transparent outer part at the regular price. Enables enjoyment of the inner mechanical parts!

RM79.40
RM79.40 Request Stock
Quick View
img
SAVERM149.90

MG 1/100 MSN-06S Sinanju Stein Ver.Ka

  • From UC: MSV, the first prototype of the iconic Sinanju- the rough-cut, white Sinanju Stein! 
  • The Sinanju Stein Ver.Ka- an almost pure-white Suit, the Sinanju Stein was designed using data from both the v Gundam and the Sazabi. This unparalleled combination of two of the most powerful Suits from the Universal Century has lead to a Suit with unique proportions and features designed to optimize performance. Of the 22 runners included with the Stein, 15 are completely new, and created for this kit. 
  • Includes marking decals created by Mr. Hajime Katoki, designer of this Suit. 
  • Gundam Unicorn-style Forearm mounted Beam Saber mounting system is included
  • Thruster unit mounted on backpack, can be locked using link arms to enable greater range of movement with the shoulder armor. 
  • Adopts the emotion manipulator for fully posable fingers, and weapons feature a double locking mechanism to hold them firmly in place from both sides.
  • Armed with Beam Rifle, bazooka, and more! 
  • Leg thruster units on the legs linked with connector arm.
  • Known as the return of the -  ??Red Comet, -  ?? Full Frontal's MSN-06S crimson Sinanju started out as the Sinanju Stein- a white prototype that pushed the boundaries of human endurance! 
  • Accessories: Beam Rifle, Shield, Beam Saber x2, Bazooka,
  • Joint for Action Base 1, Figure (standing, seated)

RM270.00
RM270.00 Request Stock
Quick View
img
SAVERM224.90

MG 1/100 MSN-04 Sazabi Ver.Ka

  • A year after the launching of MG ?Gundam Ver.Ka, the rival mobile suit Sazabi Ver.Ka is rolling out. 
  • New materials are adopted for silver frames. Texture of metal can be got without paint. 
  • The hatches of the funnel containers on the back are openable. 6 funnels are removable. The covers of Apogee Motors open in four directions. 
  • Includes original markings designed by Katoki Hajime. 
  • Besides a beam shot rifle, a shield, a beam tomahawk and a beam saber, a long rifle which is the first plastic model of the long rifle that was drawn on the image board at the beginning is included. 
  • The mono-eye on the head can be luminescent when the LED Unit Green, which is sold separately, is installed. 
  • Hand parts with "Emotion Manipulator SP" are included. All of the finger joints are movable. Even the thumbs base joints can be moved easily. 
  • Runner x31, Sticker x3, Instruction manual x1

RM315.00
RM315.00 Request Stock
Quick View
img
SAVERM359.90

MG 1/100 RX-93 Nu Gundam Ver.Ka Titanium Finish

  • Bandai really challenged itself with this kit- just one year after releasing the MG Full Armor Unicorn Gundam Ver.Ka, they -  ve translated the classic v Gundam into a Ver.Ka!
  • Three years before the Unicorn Gundam tested its mettle against the Sinanju, the v Gundam, piloted by Amuro Ray, dueled Char -  s mighty Sazabi! Realized as a highly detailed kit, this v Gundam was redesigned by Mr. Hajime Katoki, and features a streamlined, powerful shape, transforming Psycho Frame, fully jointed manipulators and a full set of marking decals- expect this to be a beautiful kit! 
  • Moulded with a special -  titanium coating -   to make this Suit stand out! 
  • Accessories: Beam Rifle, Shield, Beam Saber (large), Beam Saber (small),
  • Fin Funnel x6
  • Item Size/Weight : 39 x 31 x 12 cm / 1240g

RM600.00
RM600.00 Request Stock
Quick View
img
SAVERM22.00

[Gao Gao] 015 MG 1/100 SINANJU Ver.Ka

Daban version of MSN-06S Sinanju Ver.Ka

Brand : GaoGao
Country made : China
Code : 015

Please note that this is not Bandai products

Ver.Ka Series: VI Designed and produced by Katoki Hajime 
Total parts count: 454pcs 

Features an accurate rendition of the Sinanju's distinctive organic appearance. The large backpack unit incorporates a sliding feature that moves the external armor when the thrusters are opened. Leg units incorporate flexible thruster units. Features a detailed cockpit with an opening hatch. The head unit incorporates a linked mono-eye mechanism that moves along with the head. The complex form of the shield is rendered with total accuracy. The inside of the shield has a mounting arm for storage of a beam axe. Shield-mounted grenade launcher can be detached and re-attached to the rifle. Includes individual grenade units. Beam Saber and Beam Axe incorporate large "effect parts" molded in translucent yellow. Includes a detailed history of the Mobile Suit and story, written by the editorial staff of Gundam Ace magazine, which is serializing the Gundam Unicorn novel. Includes Gundam Decal markings. Gold highlights can be rendered either with stickers or optional water-slide versions decals.  

Weight: 1120g

RM128.00
RM128.00 Request Stock
Quick View
img
SAVERM40.40

P-Bandai Exclusive: MG 1/100 Hi-Nu Gundam Ver.Ka HWS Expansion

P-Bandai Exclusive: Hi-Nu Gundam HWS Expansion

RM179.60
RM179.60 Request Stock
Quick View
img
SAVERM112.32

MG 1/100 Victory Two / V2 Gundam Ver.Ka

  • MG commercialization hope Ranked # 1! MG V2 Gundam Ver.Ka finally here!
  • The height of the difficulty of the function realizing it was one of the factors that hinder the commercialization. In the 1/60 kit issued to broadcast at that time, the shape becomes the sacrifice in that you have to reproduce the head storage mechanism to the core fighter, it has become the impression of sagging breasts. Elimination of this part was one of the proposition. The coalescence mechanism, and technology developed through the armor extension gimmick designed in such as MG V Gundam Ver.Ka has been utilized. Regarding Speaking of V2 high demand [Assault] [Buster] equipment, is now planned also technology validation toward commercialization in the center of the mounting mechanism of additional equipment. After these processes, it became a carry that finally can be released on 35th anniversary of Gundam.
  • It comes with parts to reproduce the grenade launcher by mounted on the beam rifle. Hand-gun also possible restructuring in the parts retrofit.
  • Head precision fire for the device with the included.
  • V2 Core Fighter 2 aircraft accessories. V2 top fighter and V2 at the same time display allows the bottom fighter.
  • Accessories: beam saber × 2, beam saber (fan), beam rifle, beam shield (PET), V2 core Fighter × 2, twin-type grenade launcher reproduction for parts, Shakti figure (falling), pilot figure × 2

RM157.50
RM157.50 Request Stock
Quick View
img
SAVERM104.60

MG 1/100 V Gundam Victory Gundam Ver.Ka

  • Accessories: 
  • Beam Rifle x 1
  • Beam Saber x 2  
  • Beam Fan x 1 
  • Beam Shield x 1
  • Hexa Core Fighter x 1
  • Fighter Mode Stand Joint x 1
  • Cockpit Figure x 2 (Uso, Junko)
  • Standing Figure x 1 (Uso with Haro)

RM147.00
RM147.00 Request Stock
Quick View
img
SAVERM140.00

[Daban] 6631 MG 1/100 MSN-04 Sazabi Ver.Ka

[Daban] 1/100 MSN-04 Sazabi Ver.Ka (MG)


Series: Gundam Movie: Char's Counter Attack
Grade:Master Grade (MG)
Manufacturer: Daban
Scale:1/100

Please note that this is NOT Bandai product

RM160.00
RM160.00 Request Stock
Quick View
img
SAVERM165.00

[Daban] 6623 MG 1/100 Sinanju Stein Ver.Ka

[Daban] MG 1/100 Sinanju Stein Ver.Ka


Series: Gundam UC
Grade:Master Grade (MG)
Manufacturer: Daban
Scale:1/100

Please note that this is not Bandai Products

RM135.00
RM135.00 Request Stock
Quick View
img
SAVERM234.10

MG 1/100 Psycho Zaku Ver.Ka (Gundam Thunderbolt Ver.)

Overwhelming volume and elaborate detail, reproducible high-mobility type of each place gimmick of MG unique Zaku `Psycho Zaku` appeared !! at MG Ver.Ka
High-density detail by Hajime Katoki's complete supervision. Sealing of texture representation and gimmick in the play, reproduction without leaving the heavy equipment out of the standard.
01: huge thrusters full reproduction of anime new setting
Also reproduced without leaving huge thrusters that appeared to in the play. The large backpack equipped with a sub-arm, three large thrusters. In addition it can also be a suspension of the various weapon and. Achieve the overwhelming volume.
02: the sub-arm equipped with the expansion gimmick
Sub-arm is a large number of axis is charged, moving to flexible. Tip of the claw can also be provided with a weapon.
03: opening and closing in the cockpit hatch three stages
Cockpit is opened and closed in three stages. While realizing a gimmick in the play, produce a multiple sense.
04: Power pipe sealing texture reproduction
Reproduce the sealing to protect the indirect section and the power pipe with a plastic material in Thunderbolt Chu region.
05: the sole of the foot claw implementation
Equipped with a movable gimmick to the back foot of the claw. Enjoy the setting of the Thunderbolt version unique in the gimmick.
06: accessory parts overwhelming volume
A new set to the huge thrusters in the anime version, in addition to the beam bazooka, comes with a wide Weapon. Some armed plurality accessories, have become commodity content of large volume.

Accessories: 
beam bazooka, Giant bazooka x 3
Zaku machine gun x 2
heat Hawk x 2
Shutsurumu Faust x 3
Zaku machine gun spare magazine x 4
grip hand (left and right), weapons possession ( left and right), pedestal, stand

RM329.00
RM329.00 Request Stock
Malaysia Gundam enthusiasts and fans alike will be delighted to know that the Master Grade (MG) Ver. Ka Gundam models are now available! These models are the latest addition to the BANDAI world-renowned MG Gunpla line, and they are sure to impress. The level of detail and accuracy that has gone into these models is truly impressive, making them the perfect addition to any Gundam collection. The MG Ver. Ka line takes the iconic designs of the Gundam universe to a whole new level of realism.

The MG Ver. Ka Gundam models are made to the highest standards, ensuring that each model is highly accurate and well-crafted. From the intricate details of the weapons systems to the stunning colors, every aspect of these models has been designed with the utmost care. Whether you are an experienced builder or a newcomer to the world of Gundam, these MG Ver. Ka Gunpla models are sure to provide hours of enjoyment and satisfaction. So, why wait? Add the Master Grade Ver. Ka Gundam to your collection today!

In 2002, Bandai started releasing a Master Grade line under the label of “Ver. Ka” (Version Katoki), in honor with veteran mecha designer Hajime Katori. Some of the Ver. Ka kits were produced as a result of annual fan votes.

Showing 31 - 44 of 44 products