• The completely transformable Delta Plus Mobile suit appears as an MG! 
  
• Using careful modeling techniques, this kit can transformation mechanism to Wave Rider form is fully realized!
  
• Wave Rider form equipped with a locking mechanism to prevent accidental collapse.
  
• Shield contains storage gimmick for Beam Sabers.
  
• Suit designed by mechanical designer Hajime Katoki.
  
• Scale pilot figures included.
  

• Recreating the unique features of this dynamic Mobile Suit, Mobile Suit Gundam SEED Destiny -titular Suit is reincarnated as a Master Grade kit! 
  
• Moveable gimmick tuned to the movement of the collar area.
  
• Gimmick included to expand the hip joint, allowing for a wider range of motion.
  
• Accurate proportions highlight the characteristic silhouette of the Destiny Gundam. 
  
• Includes 1/100 scale figures of Sinn and Stella.
  
• Stand features a wing motif.
  
• Accessories: High-Energy Long-Range Beam Cannon x1, Arondight Beam Sword x1, Beam Rifle x1, Shield x1, Beam Boomerang x2, Effect Part (Blade) x3, Effect Part (Boomerang) x2, Effect Part (Shield) x1, Beam Cannon Manipulators x2 (Left and Right), 1/100 Pilot Figure x2
  

• MG Raiser, go!
  
• Internal frame structure based partly off original Gundam 00 and partly off the Raiser.
  
• Utilize the Gunpla LEDs to showcase GN particle emissions in the head, GN Drives, and particle storage tanks. 
  
• This product has five LED-enabled locations, and includes a single LED unit. Four additional Gunpla LED units required for full effect..
  
• Cockpit block features opening hatch. 
  
• Raiser binder is equipped with opening gimmick.
  
• Thanks to new molds, weapons such as Raiser Sword can be recreated.
  
• Accessories: GN Sword II x2, GN Shield, GN Sword III, GN Beam Saber,
  
• 1/100 pilot figure (Standing, Sitting)
  

• Duel Gundam Assault Shroud recreated as a Master Grade! 
  
• The second in the SEED Remaster series, the Duel Gundam is designed on the versatile X100 frame system! 
  
• Simple assembly provides the maximum range of motion with a minimum number of parts.
  
• Completely redesigned for the Remaster series of MGs.
  
• Reproduce the attachable Assault Shroud gimmick! 
  
• Cockpit hatch opens and closes, and cockpit internals are detailed.
  
• Yzak Joul figures included- sitting and standing
  
• Designed using exclusive blueprints for this Master Grade kit. 
  
• Accessories: Shield, 57mm High-Energy Rifle with 175mm Grenade Launcher,
  
• Shiva 115mm Rail Gun, 250mm 5-Barrel Missile Pod, 350mm Bazooka, Saber x2
  

• Accessories: high-energy beam rifle 60mm, beam saber × 4, beam pair shielded, Hand grip (left and right), palm (left and right) - Item Size / Weight : 39 x 31 x 8 cm / 791g
  

Technical Data

• Model number: GAT-X303
• Code name: Aegis Gundam
• Unit type: prototype attack use transformable mobile suit
• Manufacturer: Morgenroete, Inc
• Operator(s): Earth Alliance; ZAFT (Zodiac Alliance of Freedom Treaty)
• First deployment: 25 January C.E. 71
• Accommodation: pilot only, in standard cockpit in torso
• Dimensions: head height 18.86 meters
• Weight: max gross weight 79.6 metric tons
• Armor materials: unknown
• Power plant: ultra compact energy battery, power output rating unknown
• Propulsion: unknown 

According to wikipedia

GAT-X303 Aegis is a prototype transformable attack-use mobile weapon, it is featured in the anime series Mobile Suit Gundam SEED. The unit is piloted by Athrun Zala.

The Aegis is a commander-type mobile suit with very advanced sensors and heavy attack power. It can transform into a mobile armor configuration armed with a "Scylla" 580mm energy cannon (which is later mounted on the GAT-X131 Calamity Gundam). This cannon is powerful enough to destroy even a spaceship. Additionally, the suit also features a hand-held 60mm beam rifle. For close-range combat, Aegis is equipped with 4 beam sabers. As these weapons are mounted on the forearms and feet rather than hand-carried, all four can be wielded simultaneously, in either mobile suit or mobile armor configuration. Like most other mobile suits, the Aegis is equipped with two "Igelstellung" 75mm multi-barrel CIWS in its head. Lastly for defense the suit mounts a single shield on its left arm and is equipped with the Phase Shift armor system.

Designed as a command-type mobile suit by the Earth Alliance, the Aegis was one of the original five mobile suits created as part of the Atlantic Federation's G Project. The Aegis eventually was rolled out on January 20, CE 71, together with the other suits produced as part of the project. Stored in the colony Heliopolis, it became the target of ZAFT and, together with all but one of the prototype mobile suits, was stolen by them on January 25. Its pilot is Athrun Zala, who then used the suit for several months.

The Aegis is transported to Earth shortly after the Battle of Orbit on February 13 to pursue the Archangel. It is held at the Carpentaria Base in Australia until the Archangel passed through the Indian Ocean, where it was sent to rendezvous with the Vosgulov-class submarine Cousteau. The Aegis, GAT-X102 Duel, GAT-X103 Buster and GAT-X207 Blitz successfully intercepted the Archangel in midocean and forced the heavily damaged assault ship to lay over at Orb for repairs.

Finally, its destruction occured in late May while fighting Kira Yamato in the GAT-X105 Strike and Tolle Koenig in his FX-550 Skygrasper. Athrun self-destructed the Aegis while grappling the Strike, destroying both units. He ejected before self-destruction and was found injured on the shore by Cagalli Yula Athha. Later in that year, he returned to combat piloting the new, Aegis-derived ZGMF-X09A Justice. From June to the end of the war he piloted the Justice as part of the Clyne Faction, alongside Kira Yamato in the ZGMF-X10A Freedom.

The fragments of the destroyed mobile suit eventually found their final, peaceful use as a playground for young children, on the same island where Athrun and Kira fought. Its shield was later found and sold at the black market auction for junk where Lowe Guele picked up the TMF/TR-2 BuCUE Tactical Reconnaissance Type which head he used temporarily for his MBF-P02 Astray Red Frame. A variation on its transforming system is used by ZAFT, on a much larger scale, in the ZGMF-X11A Regenerate.  

After the war, the Earth Alliance produced another Aegis which was then upgraded by Actaeon Industries into the GAT-X303AA Rosso Aegis.

Weapons

• CIWS guns: Mounted in the Aegis's head are two "Igelstellung" 75mm multi-barrel CIWS guns. These light projectile weapons are used to intercept missiles and to destroy lightly armored vehicles, although it is classified as Anti Air.
  

• Beam Saber: Aegis is equipped with 4 beam sabers that are mounted on the forearms and feet rather than hand-carried, all four can be wielded simultaneously, in either mobile suit or mobile armor configuration.
  

• Shield:A simple metal shield that can be mounted on its left arm.
  

• Scylla Canon: A powerful energy cannon that is only able to be fired in its mobile armor configuration. The weapon has enough power to tear through the entire width of an Earth Alliance battle ship.
  

• Beam Rifle:For ranged combat the Aegis Gundam mounts a 60mm high-energy beam rifle.
  

Author p/s: In comparison with NG 1/100 Aegis Gundam, there were alot of huge differences in term of mobility of the modelling kits, the detailed of the armor, and the ability of transformation is another unique buying point for this gundam kit too, MUST BUY item!!

• The most powerful of all the OZ Mobile Suits, the Tallgeese is presented here for the first time as a Master Grade kit! 
  
• Re-interpreted by master designer Hajime Katoki as displayed in Endless Waltz, the Tallgeese, a Suit numbering among the most powerful in the After Colony timeline is finally recreated as an Mg. Designed with a complex inner frame as befitting a Master Grade Suit, this model is also equipped with a set of original marking decals created my Mr. Katoki.
  
• POINT 01: Reproduction of Inner Frame
  
• Inner frame is completely recreated- the Leo-style internal cameras, chest ducts, and structure are precisely reproduced. 
  
• POINT 02: Deployment of back thrusters
  
• Backpack thrusters are jointed for maneuverability and can be opened or closed for a variety of poses.
  
• POINT 03: Deployment of lumbar thruster
  
• Rear skirt thrusters equipped with deployment gimmick to enhance the action potential of this kit.
  
• POINT 04: Dover Gun
  
• A first for a Gundam model, the Dober Gun is equipped with a blowback gimmick activated by pulling back the bolt.
  
• Accessories: Dober Gun, Shield, Beam Saber x2, 1/100 Zechs Marquise (Standing) 1/100 Zechs Marquise (Sitting), Fist (Left and Right), Open Palm (Left and Right), Weapon Grip (Left and Right)
  

• The customized Sengoku Astray in the Master Grade quality that fans have come to expect
  
• Based on the Red Frame Astray, the Sengoku Astray is more heavily armored than the original Red Frame and presented as a detailed 1/100 scale kit. Shoulder armor and shield are equipped with a deployment gimmick, and the kit is accurately color-moulded with clear and plated parts, and includes decals for the smaller details.
  
• Sengoku Yoroi shoulder armor is deployable- use it to give the Sengoku Astray two extra sword-wielding arms or as a weapon to increase the Astray’s punching power.
  
• Oni Tate shield is deployable to server as rear protection or as an arm-mounted shield, and the ‘mouth’ of the shield can open
  
• Kotetsu and Kiku-ichimonji katana swords have chrome plated blades! 
  
• Recreate the dual-blade fighting style, and utilize the deployable shoulder armor as extra arms or knuckle weapons, and sheathe the swords in the shoulder armor
  
• This Suit has its own remodeled Red Frame, along with the custom katanas Kotetsu and Kiku-ichimonji 
  
• Accessories: Kiku-ichimonji (Katana), Kotetsu (Katana), Oni Tate Shield
  

• 18 years after the anime ended, we finally have a Master Grade Gundam X!
  
• From After War Gundam X comes the compact, yet powerful Gundam X. Recreated in detailed 1/100 scale, this kit features the massive Satellite Cannon and reflector panel deployment gimmick, along with glossy armor highlights, bringing out the color difference. Well proportioned and featuring a variety of gimmicks, this kit is what is expected of a modern MG.
  
• Includes backpack-mounted reflector panels, massive satellite cannon and deployment gimmick for both
  
• Large Beam Sword with clear effect parts
  
• Transformable Shield Buster Rifle can switch from shield mode to rifle mode
  
• Chest camera eye recreated in clear parts, and the Shoulder Vulcan Cannons are expandable
  
• Developed by the United Nations Earth and introduced near the end of the Seventh Space War, the GX-9900 Gundam X was an incredibly powerful Mobile Suit, and carried a devastating weapon: the the huge Satellite Cannon, a weapon able to destroy colonies with a single shot.
  
• Accessories: Satellite Cannon, Beam Sword, Shield Buster Rifle, Weapon Holding Manipulators (Left and Right), Fist Manipulators (Left and Right) Open Palm Manipulators (left and Right), Action Base joint, Garrod Ran (Standing), Garrod Ran (Seated)
  
• Item Size/Weight : 31.2 x 20.2 x 11.5 cm / 573g
  

• MG Hyaku-Shiki is reborn as Ver.2.0. 
  
• Based on the Movable Frame of "MG Gundam Mk-II Ver.2.0", the MS features transformational gimmicks and realizes a range of motion close to that of human. 
  
• The light emissions from the Camera Eye seen in the anime can be recreated. Use replacement parts to recreate "standard mode", "Dual Eye mode" and "Scanning Beam modes". 
  
• Based on the celluloid pictures, reddish gold for the exclusive use of Ver.2.0 is plated. 
  
• The Clay Bazooka and Beam Rifle can be hung from the Backpack. The blade of the Beam Saber is recreated with clear parts. 
  
• Runner x14, Foil sticker x1, Tetron sticker x1, Instruction manual x1 
  

• From Mobile Suit Gundam 00, the Gundam Vache on which Tieria Erde is on board is now in the MG lineup!
• Pursuing the structure to the utmost limit and realizing the replacement with Gundam Nadre, which is also the biggest feature.
• The armor can be attached and detached in the image of the setting. The lining parts create a sense of density and stacking.
• Each part hatch can be slid to reproduce the GN field expansion state.
• The GN cable on the legs uses resin parts that have undergone hologram processing.
• The GN cannon on both shoulders expands and contracts, and moves to the upper part of the fuselage to reproduce the attack form.
• The code part, which is a feature of Nadre, has a multi-layered structure that applies figure modeling technology to challenge detailed expression.
• Includes Nadres exclusive shield, GN beam rifle, and effects.
• In addition to the GN drive, a solar furnace is also included as a bonus part.
• In addition to the pilot suit, a 1/100 scale figure of Tieria in a dress is included.

• GN Cannon x 2
• GN Bazooka x 1
• GN Shield x 1
• GN Beam Saber x 2
• GN Beam Rifle x 1
• Effect Parts for GN Beam Rifle x 1
• GN Drive x 1
• Solar Furnace x 1
• Figure x 3 types
• Foil sticker x 1
• Marking sticker x 1
• PP sheet x 1

• Body Unit
• "Maga no Ikutachi" Energy Absorption Blade
• "Trikeros Kai" Offensive Shield System
• "Totsuka no Tsurugi" Saber
• "Trikeros Kai" Offensive Shield System
• Sword
• Dedicated Standbase
• Water-slide decal