Gundam Model Kits

Showing 61 - 90 of 1523 products

img
SAVE RM16.00

[364] SDBB 00 Qan[T]

  • Lens is reproduced with clear parts! 
  • GN shield can be attached to the back! 
  • Accessories: GN Sword V, GN Sword GN Sword V for the union point of a sword-bit, BB322 Raiser particles for storage tank, grain storage tank, seat.

RM31.90
img
SAVE RM47.90

[040] HG 1/144 Oowashi Akatsuki Gundam

Oowashi Akatsuki Gundam (HG) 1/144

RM96.00
img
SAVE RM31.90

[032] HG 1/144 Infinite Justice

What could possibly be better than Infinite Justice? Isn't that the way the giant robot world works anyway? Here's the Infinite Justice Gundam to prove just that, powered up with a tonne of weaponry, full action with polycaps at the joints, the "Phantom-01", and a display stand to show it all off. All parts are molded in colour and snap together, so you don't need to paint or glue it; stickers are included for added detail.

History of Infinite Justice
The ZGMF-X19A Infinite Justice Gundam is an advanced mobile suit secretly built by ZAFT's rogue Clyne Faction, based on the earlier ZGMF-X09A Justice. It utilizes a new engine design and advanced weaponry that gives it several times the combat ability of the original Justice.

The Second Battle of Orb
The ∞ Justice makes its debut in Cosmic Era 74, arriving on Earth together with the ZGMF-X20A Strike Freedom during the ZAFT invasion of Orb. It is delivered to Athrun Zala personally by Lacus Clyne, who pilots the ∞ Justice through atmospheric re-entry and lands in the Archangel's mobile suit hangar to give it to Athrun. After talking with Lacus, Athrun takes off in the infinite Justice to back-up Kira in the Strike Freedom, who was battling both the ZGMF-X42S Destiny and the ZGMF-X666S Legend and manages to chop off Destiny's wrist despite Athrun being injured before the fight.

The Final Battle of Second Bloody Valentine War
The Justice also plays a highly prominent role in the end of the Second Bloody Valentine War. First, Athrun disables both Shinn Asuka's Destiny and Lunamaria Hawke's ZGMF-X56S Impulse. Then, Athrun cripples the Minerva by utilizing the multiple beam cutters on the Justice's Fatum-01 backpack to destroy the Minerva's spaceflight engines. Lastly, Athrun used the ∞ Justice's backpack, along with help from Mu La Flaga's ORB-01 Akatsuki's DRAGOONs, to destroy Requiem. When the battle is brought to an end, the ∞ Justice rescues both Shinn and Lunamaria.

Source:wikipedia

RM64.00
img
SAVE RM310.90

PG 1/60 Zeta Gundam

  • Movable mechanics were reproduced within Action Mechanics Models 'and' complete transformation] to
  • Zeta Gundam, the best of both models. Gimmick Built-parts issue.
  • Expand the abdomen and the head cover in conjunction with mobile chest.
  • Work together to deploy a dedicated beam rifle scope barrel / grip /.
  • Built-saber is emitting gimmick (1) clear edge beams and parts (2) is attached.
  • Deformable skeleton (full frame mover) in combination with external armor
  • Pursued the reality of the Mobile Suits.
  • Combined with a snap-fit \u200b\u200bassembly and service.

RM790.00
img
SAVE RM24.90

[047] HG 1/144 GSX-401FW Stargazer Gundam

Backpack Gimmick is amazing. HG Series stand included. Great mobility on leg and arm with shinny decoys~
Combat Abilities
Although the Stargazer is intended as a non-combat unit, it actually has impressive defensive and offensive capabilities. During its battle against Phantom Pain, the Stargazer displayed incredible speed and weapon accuracy.
The Stargazer can deflect and capture incoming beam shots to create a field of beam cutters. In addition, it can use the beam pistol utilized by the UT-1D Civilian Astray DSSD Custom. When used in combat, the Stargazer's AI unit is replaced with a cockpit block for two pilots. 

RM64.00
img
SAVE RM69.96

MG 1/100 RX-78GP03 Gundam Stamen

  • The GP-03S gets the MG treatment and as usual the results are superb. Includes a folding bazooka, beam rifle, beam saber and folding shield. The core fighter is detachable. 
  • Armor is detachable to expose the skeleton and hydraulics. Like all the kits in the MG series, the level of detail is superb, and virtually everything moves. 
  • The rocket packs are moveable and the hatch opens on top to allow access to the beam sword. The shield folds up to be stored on the arm. The left arm opens and the claw extends outward. 
  • Two types of hands are included -- fists, and posable (moving fingers). All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. 
  • Of course, the use of cement and paints will improve the appearance of a finished model.

RM139.90
img
SAVE RM20.00

[322] SDBB 00 Raiser

  • Play value packed with a large number of the original gimmick.
  • To Raiser in Gundam + Raiser.
  • Saber mode of GN Sword II is reproduced in clear plastic.
  • It is equipped with an SD of original gimmick (Bird mode Fighter mode Rider mode) three
  • Width of play further expand!
  • Accessories: GN Sword II × 2, GN shield × 2, GN Sword II beam saber mode for parts × 2


RM39.90
img
SAVE RM28.70

[014] HG 1/144 GNW-003 Gundam Throne Drei

Its armaments include a GN hand gun, two GN beam sabers, GN shield pods, and a GN shield. Acting as a support unit for her brothers' Mobile Suits, Gundam Throne Drei can connect with Gundam Throne Eins through the included bendable wire to charge its GN mega launcher for a devastating attack!

RM67.20
img
SAVE RM49.90

[002] RG 1/144 MS-06S Char Zaku II

  • Brand new second pla 30th Anniversary RG 1 / 144 Zaku, go! 
  • Zaku appearance with the real system. RG evolution of quality is more intact here now! 
  • Advanced MS adopted the joint. (Advanced MS completely new type of joint) 
  • To maximize the frame structure, allows a variety of poses. 
  • Axial movement of the movable skirt waist and groin, an impressive reproduction Shaazakukikkupozu. 
  • Moving from the collarbone to the shoulder structure, optimization of axial position and moving it does not interfere with armored division. 
  • The hip, thigh, shin, and ankle bend up to the class what MG Ver.2.0 1 / 144 the size pursue. 
  • Part of the distinctive pipes pipe ... Zac is [the 組Miyasu] and [finish] both. 
  • Better finish [Tatchigeto] adopted. 
  • Expansion of lumbar range of movement ... the lumbar region boasts the largest among the Zaku mobile full series of pla. 
  • Riarisutikkudekaru real texture stage 
  • Realistic sense of feeling and precision mechanics in the details and put it on one point. 
  • Riarisutikkudekaru - the texture of the metal can be reproduced. 
  • By attaching the decals to the metallic joints, reproduce realistic texture. 
  • 1 / 144 scale unparalleled color reproduction. 
  • Bring out the charm of the exterior [of multicolored armor] is applied. 
  • Accessories: Zaku machine gun, Zaku bazooka, Hitohoku

RM100.00
img
SAVE RM61.80

MG 1/100 Gundam F91 (Harrison Madims Custom)

  • Blasting out of acclaimed manga Crossbone Gundam, rival pilot Harrison Martin’s customized Gundam F91 joins the Master Grade lineup! 
  • Features incredibly solid joints, thanks to a frame designed without poly caps.
  • Miniature Suit design supports a wide range of motion.
  • Water slide decals included to recreate the colors and detailed markings of the Suit.
  • VSBR features extending gimmick, elongating as the barrel is brought to bear.

RM118.10
img
SAVE RM142.90

MG 1/100 Gundam Epyon EW

  • Gundam Epyon is newly designed in the EW version. 
  • It can be completely transformed from the MS mode into the flying mode. 
  • Thanks to "the pullout system", you can reproduce its heat rod's whip. 
  • Various gimmicks give expression to "Soryu". Its neck, mouth and hand claws are movable.
  • Includes marking stickers designed by Hajime Katoki.

RM145.00
img
SAVE RM31.90

[041] HGUC 1/144 MSZ-006 Zeta Gundam

HGUC MSZ-006 Zeta Gundam 1/144

RM64.00
img
SAVE RM91.90

MG 1/100 Gundam Deathscythe-Hell EW Ver.

  • Following EW ver. Death Scythe rated No.01 for item of most interest at the Tokyo Hobby Show MG booth, the Death Scythe Hell takes off! 
  • Uses the XXX-G Frame developed during the animation!
  • Marking work is designed by Hajime Katoki.
  • Increased freedom of movement when set on Action Base, by the placement of joint at the wing connection part.
  • New gimmick and mechanism equipped to the Active Cloak. By pulling from the base part of the wing, the internal machinery will appear. 
  • Able to reproduce the flapping from the animation naturally. 
  • The closed state of the Active Cloak can also be reproduced with a natural form. 
  • Accessories: Beam Scissors, Active Cloak Technology & Combat Characteristics The Gundam Deathscythe was the "masterpiece" of Professor G. 

RM178.00
img
SAVE RM75.90

MG 1/100 GN-001 Gundam Exia

  • The first MG from Mobile Suit Gundam: 00, this long-awaited kit delivers on every level! 
  • Thanks to advances in kit design, the inner frame moves along with the outer armor to recreate the Exia's unique range of motion! 
  • GN Condensers on the arms/chest/legs are double-layered, clear plastic to reproduce the look of real lenses, giving it a more accurate appearance.
  • Each GN Code piece throughout the body of the Exia is recreated in clear plastic to mimic the look of the Suit in the anime! 
  • Includes custom marking seals and Gundam Decals.
  • Includes GN Code decal sheet.
  • GN drive completely reproduced. As with in the anime, the GN Drive can be removed
  • stand included to hold the Drive while it's not with the Exia.
  • Accessories: GN Sword x1, GN Long Blade x1, GN Short Blade x1, GN Beam Dagger x2,
  • GN Beam Saber x2, GN Shield x1, 1/100 Setsuna F. Seiei figure x1

RM152.00
img
SAVE RM101.90

MG 1/100 MS-06S Zaku II (Johnny Ridden Custom) Ver.2.0

  • Designed on the basic inner structure of the Zaku II Ver. 2.0, legendary Zeon ace pilot Johnny Ridden’s custom Zaku II is added to the Zeon Master Grade lineup! 
  • Features redesigned thruster housing and shoulder armor inspired by the Zaku II 06R.
  • ‘Monoeye’ camera movement gimmick allows for eye position to be changed.
  • Separable spike elements set this kit apart from your standard Zaku. 
  • Thanks to the updated power pipe assembly system, the once tedious process has been streamlined by using pre-positioned runners. 
  • Cockpit hatch can be from the left or right, and cockpit can be shifted from right to left thanks to a lever gimmick. 
  • Accessories: 120mm Machine Gun x1, Zaku Bazooka x1, Heat Hawk x1, Giant Bazooka x1, 1/100 Pilot Figure x2, Action Base Joint x1

RM168.00
img
SAVE RM89.90

MG 1/100 MS-06K Zaku Cannon

  • Designed on the basic inner structure of the high-performance Zaku II Ver. 2.0 for maximum dynamic potential! 
  • Cannon Pack is removable, and features detailed connection points, including the bolts and clamps securing the pack.
  • Recreate the dynamic firing pose! 
  • Rocket Launcher mounted at the rear waist.
  • Cockpit hatch system differs from previous Zaku Suits, setting the Zaku Cannon apart! 
  • Includes two styles of antenna, allowing you to make this Suit your own. 
  • Various unique marking decals included to replicate the look of the Suit’s appearance in MSV.
  • Accessories: 120mm Machine Gun x1, Zaku Bazooka x1, Heat Hawk x1, Cannon Pack x1, 1/100 Pilot Figure x2, Antenna x2, Action Base Joint x1

RM180.00
img
SAVE RM100.61

MG 1/100 Destiny Gundam

  • Recreating the unique features of this dynamic Mobile Suit, Mobile Suit Gundam SEED Destiny’s titular Suit is reincarnated as a Master Grade kit! 
  • Moveable gimmick tuned to the movement of the collar area.
  • Gimmick included to expand the hip joint, allowing for a wider range of motion.
  • Accurate proportions highlight the characteristic silhouette of the Destiny Gundam. 
  • Includes 1/100 scale figures of Sinn and Stella.
  • Stand features a wing motif.
  • Accessories: High-Energy Long-Range Beam Cannon x1, Arondight Beam Sword x1, Beam Rifle x1, Shield x1, Beam Boomerang x2, Effect Part (Blade) x3, Effect Part (Boomerang) x2, Effect Part (Shield) x1, Beam Cannon Manipulators x2 (Left and Right), 1/100 Pilot Figure x2

RM187.20
img
SAVE RM99.90

MG 1/100 Zeta Gundam Ver.2.0

  • Big beautiful version 2.0 Master Grade Zeta Gundam comes with a bazillion parts (yes, I'm too lazy to count them. 17 ABS runners, one base, plus polycaps) and goes together in the new fashion, with the super new joints at the waist and in the arms and legs, allowing it even more freedom of movement and incredible posing than ever before! 
  • It's fully-transformable when completed, too. What more could you ask for? (well, a life-sized version would be nice, but you'd get tired just lifting the polycaps, trust me). 
  • Shield and beam mega launcher weapons (as well as the regular rifle, beam sabres, etc.) are included, and a custom catapult stand is included to hold it all up -- with all the extra armour and weaponry, it'll be a little heavy when completed! Two unpainted pilots and an unpainted miscellaneous crew member are included. 
  •  All parts snap together and are molded in colour so paint and glue for the kit are not necessary; foil stickers and clear Gundam stickers are included for detail. 
  • However, if you'd like to paint it, it would look pretty spiffalicious, and a paint scheme is provided (paint is of course sold separately).

RM200.00
img
SAVE RM81.90

MG 1/100 Wing Gundam Zero Custom

Wikipedia information
  • The XXXG-00W0 Wing Gundam Zero (aka Wing Zero) is a mobile suit that appears in Mobile Suit Gundam Wing and its sequel OVA/movie Endless Waltz. Though having many pilots during its lifetime, the unit was most famously piloted by the series main protagonist Heero Yuy. 
  • Wing Gundam Zero was designed by the five engineers fifteen years prior to the events of the Eve Wars, the Wing Zero is the ancestor of the five Operation Meteor Gundams (Wing, Deathscythe, Heavyarms, Sandrock, and Shenlong). Designed with "Perfect Victory" in mind, it boasts exceptional abilities and is one of the two suits which utilize the ZERO System (the other being the Gundam Epyon), but because of this dangerous mental interface, it was kept hidden away until Quatre Raberba Winner desperately built it following his father's death. Like the Wing Gundam, it can transform into a high-speed flight mode dubbed "Neo-Bird Mode." Further, its twin buster rifle has more than twice the output of the Wing Gundam's buster rifle, giving it enough power to destroy an entire space colony or resource satellite in a single shot. It features hidden thrusters in the shoulder armor, where the armor splits open to reveal the nozzles. The feet also house powerful thrusters in order to give the Neo-Bird Mode extreme speed.

RM152.00
img
SAVE RM60.00

MG 1/100 Shining Gundam

Transform into Super Mode 1/20 Domon in Virtual Suit is included. Shining Finger and other fighting hand parts are included.

RM89.90
img
SAVE RM96.90

MG 1/100 FA-010S Full Armor ZZ Gundam

  • MG FA-010S Full Armor ZZ Gundam

RM234.00
img
SAVE RM24.00

[045] HG 1/144 0 Gundam (Type A.C.D)

- A rifle that shields of the exclusive use and is special is attached. - Accessory: 1 and 2 and 1 and 1 and double Audra Eve × GN particle storage tank × 1 GN shield × GN beam saber × GN beam rifle

RM47.90
img
SAVE RM117.90

MEGA SIZE 1/48 MS-06F Zaku II

  • Comes with a blade antenna head parts - And only wrist was new to the Zaku Bazooka. Wrist Zaku machine gun, heat hawk also supported. Also included rear rack. 

RM312.00
img
SAVE RM75.90

MG 1/100 Shenlong Gundam EW Ver.

  • The 3rd volume of the EW version is Shenlong Gundam! 
  • The EW ver. Dragon-Hang has been reproduced. The new design of Dragon-Hang has been reproduced, with 5 points of articulation allowing for the opening of the "Fang" gimmick to be reproduced. 
  • Marking work designed by Hajime Katoki. 
  • Accessories: Dragon-Hang, Beam Trident, Shield

RM152.00
img
SAVE RM16.00

[365] SDBB Sinanju

- SD weight of the volume while Shinanju appeared very suitable for MS! - SD in if you are a full Pureibaryu! - Moving from side to side mono eye look and move! - SD original! Respectively variations in upper and lower body Bisutomodo! - Parts Weapon rich! - SD completely reproduce patterns while the combination of weapons. - Accessories: Axe beams × 2, beam rifle, grenade launchers, shields, Beam saber, pedestal

RM39.90
img
SAVE RM27.20

SDBB Gundam RX-78NT-1 & Gundam GP01Fb

- Inherit Gundam RX-78-2 Gundam justice to two great co-star! - NT-1 is enhanced armor [Armor Chobham] accepted wear! - Chobham armor Chobham original tank is BB! - Head Gear original BB. - GP01Fb Gundam is one of the episodes up to the movie [Retrofit] reproduced in the product! - The retrofit parts recombination, GP01 and can reproduce GP01Fb. - The newly added Makingushiru, SD yet, MG reminiscent of the dignity! - Accessories: Gundam RX-78NT-1 ... Armor Chobham, Gatling gun × 2, beam saber, shield - Accessories: Gundam GP01Fb ... GP01 retrofit parts, beam rifle, beam saber × 2, Shield

RM61.70
img
SAVE RM7.70

[276] SDBB Duel Gundam

BB Duel Gundam

RM21.20
img
SAVE RM30.00

[070] HGUC 1/144 MS-14S Gelgoog Char Custom

Not only is this Gelgoog Commander Type a highly modified version of the mass produced Gelgoog, it also comes in red and pink colors to identify it as Char's own personal custom mecha and to compliment his nickname, the Red Comet. Char's custom Gelgoog is armed with a beam rifle, beam Naginata, and a shield. (Note: Display stand is not included.)

RM59.90
img
SAVE RM69.90

MG 1/100 MS-06F Zaku II Ver.2.0

  • A realistic kit for the famed earthbound Zaku II, the Ver. 2.0 is the advanced heir to the older Master Grade line, and introduces a new standard for MG Zaku II! 
  • With a new frame for a new line, this redesigned kit boasts a new 06 Zaku II frame that will be seen in new Zaku kits.
  • Inner frame designed to accommodate a wide variety of Zaku designs.
  • Power pipe systems redesigned for easy building, and frame features improved twist joints, giving the kit much more action than the previous Zaku II MG.
  • ‘Monoeye’ camera movement gimmick allows for eye position to be changed.
  • Inner frame features a shell for the massive shoulder armor.
  • Outer shoulder armor is recreated with detachable spikes.
  • Redesigned ankle link boasts improved performance. 
  • New mobile dual action mechanism improves leg joint performance .
  • Cockpit hatch can be from the left or right, and cockpit can be shifted from right to left thanks to a lever gimmick. 
  • Accessories: 120mm Machine Gun x1, Zaku Bazooka x1, Heat Hawk x1, 1/100 Pilot Figure x2, Action Base Joint x1

RM140.00
img
SAVE RM67.90

MG 1/100 MS-06F Zaku Minelayer

  • Mine dusting comes with backpack, detachable rack of mine in the cartridge type.
  • (Can be deformed in a way that Sowase to roll bar mine is linked on a consolidated structure)
  • Knee leg Unlike J type and the last (ground mercenaries do), attitude control rocket,
  • Change in space for type and propulsion rocket is added.
  • Poses flexible to the basic structure MG Zaku Ver.2.0.

RM180.00

Showing 61 - 90 of 1523 products