Price Clear







Gundam Model Kits

Showing 61 - 90 of 2757 products

[070] HGUC 1/144 MS-14S Gelgoog Char Custom
SAVERM44.80

[070] HGUC 1/144 MS-14S Gelgoog Char Custom

Not only is this Gelgoog Commander Type a highly modified version of the mass produced Gelgoog, it also comes in red and pink colors to identify it as Char's own personal custom mecha and to compliment his nickname, the Red Comet. Char's custom Gelgoog is armed with a beam rifle, beam Naginata, and a shield. (Note: Display stand is not included.)

RM63.00
[044] HG 1/144 Gundam Exia Repair II
SAVERM27.90

[044] HG 1/144 Gundam Exia Repair II

  • Gundam Exia in its restored form features new GN Sword weapon and different leg and shoulder parts. Also contains parts to build the original Exia.
  • Accessories: new GN Sword x 1, GN beam saber x 4, GN shield x 1, GN Short Blade x 1, GN Long Blade x 1, GN beam saber x 1

RM56.00
[054] HGUC 1/144 Asshimar
SAVERM54.80

[054] HGUC 1/144 Asshimar

The best thing about this disturbingly orange and green mecha is the fact that when it"e;s completed, it can transform from Mobile Suit mode to Mobile Armour mode. 

A custom display stand for showing it off is included as well. 
All parts snap together and are molded in colour; polycaps ensure smooth-moving joints. 
Foil stickers for details are included.

RM77.00
[003] RG 1/144 Aile Strike Gundam
SAVERM69.70

[003] RG 1/144 Aile Strike Gundam

  • RG series third, was born here. Aile Gundam SEED - [Kira Yamato Strike, Go! ]
  • New MS Adovansudo joint appearance in the play [X100 series frame] in the adoption of new mobile gimmick, Further extend mobile performance.
  • Holding the knife twisting arms crossed ... shoulders, seeking to show off moves Kiru.
  • Optimizing squatting position sled ... armored division and the movable shaft structure does not inhibit the movement from the shoulder to the collarbone.
  • Ready to strike ... crotch, thigh portion, the neck, the pursuit of maximum bending of the ankle.
  • Bring out the real attraction [of multi-colored armor.
  • Launch of Kira Yamato, sitting figures included.
  • Accessories: Shield, beam rifle, beam saber × 2, Amashunaida × 2, Basis for a joint action, 1 / 144 Kira Yamato (standing, sitting)

RM98.00
[111] HGUC 1/144 ZZ Gundam
SAVERM62.30

[111] HGUC 1/144 ZZ Gundam

ZZ Gundam makes the move to HGUC! To preserve the outstanding detail and proportions, transforming is accomplished via interchangeable parts. The 'Double-Zeta' can be transformed between Core Fighter, Core Top, Core Base, and G Fortress modes. As part of its arsenal, the ZZ Gundam features a Double Beam Rifle, two Hyper Beam Sabers, and Missile Pods. When displaying it in G Fortress Mode, part of the frame is used as a base. This piece also holds parts which are not used when in certain modes. Foil stickers are also provided. - Also comes with a stand base that makes balanced display possible. - Accessories: Hyper Beam Saber, Core Fighter, Double Beam Rifle, Display Stand

RM87.50
MG 1/100 GN-0000 Gundam 00 Raiser oo Raiser
SAVERM166.50

MG 1/100 GN-0000 Gundam 00 Raiser oo Raiser

  • MG Raiser, go!
  • Internal frame structure based partly off original Gundam 00 and partly off the Raiser.
  • Utilize the Gunpla LEDs to showcase GN particle emissions in the head, GN Drives, and particle storage tanks. 
  • This product has five LED-enabled locations, and includes a single LED unit. Four additional Gunpla LED units required for full effect..
  • Cockpit block features opening hatch. 
  • Raiser binder is equipped with opening gimmick.
  • Thanks to new molds, weapons such as Raiser Sword can be recreated.
  • Accessories: GN Sword II x2, GN Shield, GN Sword III, GN Beam Saber,
  • 1/100 pilot figure (Standing, Sitting)

RM241.50
RM241.50 Add to cart
[004] RG 1/144 MS-06F Zaku II
SAVERM69.70

[004] RG 1/144 MS-06F Zaku II

  • Zaku II, which sustains the massive military potential of Zeon, joins in the RG series. Mounted the Real system. 
  • The head parts include two kinds of antennas for commander, and a head for ordinary soldier. 
  • F type armor is faithfully reproduced. 
  • Various hand parts are included. The right hand has better gripping force to hold the rifle. The left flat hand makes it look more expressive. 
  • Adopted the ""Advanced MS joint"". 
  • The ""Realistic decal"" makes it possible to reproduce mechanical texture. 
  • Runner x9, Realistic decal x1, Instruction manual

RM98.00
MG 1/100 G Armor Real Type Color
SAVERM268.90

MG 1/100 G Armor Real Type Color

  • "Mobile Suit Gundam" G armor of Real Type Color (Gundam+G armor) that got into the news occasioned of the boom at the broadcasting this time with the movie poster etc. 
  • is reproduced. Another marking etc. attached are newly scheduled. - Can be combined with the G-Fighter and Gundam to create "G-Armor," "G-Sky," "G-Sky Easy," "G-Bull," "G-Bull Easy," and "Gundam High Mobility" modes! 
  • Main body and others accessory - Beam rifle: 1 - Beam saber: 2 - Shield: 2 - Hyper bazooka: 1 - Collaboration only for action base: 1

RM378.00
RM378.00 Add to cart
[126] HGUC 1/144 RGM-86R GM III
SAVERM37.40

[126] HGUC 1/144 RGM-86R GM III

  • GMâ…¢ from "Mobile Suit Gundam ZZ" joins in the HGUC series. 
  • By replacing the parts, you can make "GMâ…¢ custom ver.", which appears in episode 2 of "Mobile Suit Gundam UC". 
  • Includes various hand parts. 
  • Runner x9, Foil sticker x1, Instruction manual

RM52.50
[101] RX-0 Gundam Unicorn (Unicorn Mode)
SAVERM42.30

[101] RX-0 Gundam Unicorn (Unicorn Mode)

- Unicorn Gundam Unicorn mode and Destroy mode are both released at the same time! Unicorn Gundam Unicorn mode is No.101 of HGUC - By eliminating the transformation gimmick between unicorn mode and destroy mode, a higher quality and proportion has been obtained. - By replacing the parts that moves in the anime, the image of transformation has been emphasized without actually transforming. - Uses the PS material that doesn't contain ABS, great for paint users. - Use of new type polycap allows increased posing range. - Includes: Shield (Closed) x1, Beam Saber (with beam) x2, Hyper Bazooka (Closed) x1

RM59.50
[128] HG 1/144 Master Gundam & Fuunsaiki
SAVERM69.70

[128] HG 1/144 Master Gundam & Fuunsaiki

- Undefeated Eastern schools, HGFC fought! Teacher and Student Showdown Masutagandamu VS Shining! - Favorite horse [restart Fuuun] together make your emergency. - Reproduce the mantle retracted during deployment. Work which can be replicated in the play peek hand from the cloak. - The base of the cross is a master / sculpture unbeaten 144 east. By adjusting the cut position Can be held in Masutagandamu. - Includes: Cape (Osamu Osamu expanded range), cross-hand grip + master effects, amazing fist heaven Ishiba, left Hirate, Dakunesufinga left, right and left wrist postures

RM98.00
[050] HGUC 1/144 G-Armor Gundam
SAVERM87.20

[050] HGUC 1/144 G-Armor Gundam

Two kits in one, this HG G Armor kit comes with parts to build the G Fighter and the RX-78-2 Gundam! Not a speck of detail is lost, even in this fairly small scale; The G Fighter can transform into the G Blue, G Blue E-z, G Sky, and G Sky E-z, when completed. The RX-78-2 is transformable, too (well, its lower half comes off!) to allow you to build the Gundam Sky. Neat PVC caterpillar tracks are included for the G Blue and G Blue E-z (the tracks can also be retracted into the body of the main machine), and an unbuilt display base allows you to show off the various modes to their very best effect! Of course all the parts are molded in coloured plastic, and snap together, so no paint or glue are required. Polycaps are included for all the movable joints; foil stickers are included for detail. Don't miss out on this terrific set!

RM122.50
RM122.50 Add to cart
MG 1/100 MS-06S Char's Zaku II Ver.2.0
SAVERM97.10

MG 1/100 MS-06S Char's Zaku II Ver.2.0

  • Here's Char's Zaku II, getting a "Ver. 2.0" update more than a decade after its first MG kit release.
  • This kit features a completely revamped inner frame construction that allows for even greater range of articulation and realistic movement; it's even able to be posed kneeling on one leg as seen in the show!
  • Aside from the improved articulation, one of the major features of this kit is the incredible new molding process that has two different sections of the pipes molded together for easy slide assembly.
  • Weapons include a Zaku machine gun, Zaku bazooka, and a heat hawk. Two types of blade antennas are included along with a lift vehicle to bring the included 1/100-scale standing Char Aznable (molded in red) to the cockpit.

RM136.50
RM136.50 Add to cart
[375] Legend BB Commando Gundam
SAVERM32.40

[375] Legend BB Commando Gundam

- Accessories: Heavy cannon, laser machine gun with grenade launcher, missile launcher, Pineapple ball x 2, command knife, Vulcan pod, target scopes, gun case. 


 - Item Size : 31 x 20 x 5.5 cm

RM45.50
MG 1/100 PMX-003 THE-O
SAVERM276.70

MG 1/100 PMX-003 THE-O

  • It -  is the 15th anniversary of the Master Grade line! The fans demanded it, and thanks to new kit technologies, it -  is finally possible! Standing at over 9 inches tall and weighing in at almost a pound and a half, the massive S-class kit: The O! 
  • At just under 1.5lbs, the massive inner frame and joint support structure emphasizes weight distribution while retaining the level of detail that you will come to expect in a Master Grade kit.
  • Hidden arms accurately recreated for this kit with moving fingers and folding gimmick.
  • Highlighting the power and scale of this mammoth Mobile Suit, the legs of this kit have a full, heavy feeling to ground the kit for display! 
  • The full body of the kit is highly detailed for a style worthy of the 15th anniversary MG kit! 
  • Accessory: Beam Rifle, Beam Sword x4

RM490.00
RM490.00 Add to cart
[066] HG 1/144 RX-78GP02A Gundam Physalis
SAVERM51.80

[066] HG 1/144 RX-78GP02A Gundam Physalis

  • Awesome HG kit of the all-powerful and intimidating Gundam GP02A as appeared in the MS Gundam 0083 Stardust Memory OVA. 
  • It's a simple snap-fit plastic kit of GP02A that comes with all of its weapons used in the OVA including the giant bazooka and a super thick shield. 
  • Included in this kit is a Display Stand that can hold GP02A as if it's floating in space. 
  • The display base also allows for another stand attachment where GP01 (sold separately) can be attached for a beam saber fight display with GP02A as seen in the OVA series.

RM80.00
[011] HGUC 1/144 AMX-004-2 Qubeley Mk-II
SAVERM44.80

[011] HGUC 1/144 AMX-004-2 Qubeley Mk-II

[011] HGUC 1/144 AMX-004-2 Qubeley Mk-II

RM63.00
[037] HG 1/144 Gundam Seraphim
SAVERM23.90

[037] HG 1/144 Gundam Seraphim

GN-009 Seraphim Gundam (HG) Carried on the back of Seravee Gundam, Seraphim Gundam is now offered as a snap-fit plastic kit! Molded in color, Seraphim Gundam will be fully poseable with polycap and ball-jointed articulation upon completion, and it's also transformable into a backpack to attach to the back of Bandai's HG Seravee Gundam kit (sold separately). When in backpack mode, its torso can be slid open into Face Burst mode. Two Beam Sabers and a sheet of foil stickers are included.

RM48.00
MG 1/100 RX-0 Unicorn Gundam 02 Banshee
SAVERM151.90

MG 1/100 RX-0 Unicorn Gundam 02 Banshee

This black variant of the Gundam Unicorn first revealed in episode 4 of “Mobile Suit Gundam Unicorn,” features an all dark and yellow color scheme with a special translucent orange-yellow frame that shines under a black light meant to simulate the fiery glow of the “Psycho Frame”. This MG version features the OVA exclusive weapons, the Armored Arm VN and Armored Arm BS that mount on its arms and is fully transformable between Unicorn and Destroy Mode. Molded in colors meant to represent a black lion, complete with golden mane and requiring no glue for assembly, the Banshee is a must have Gundam design from “Gundam Unicorn”. Other accessories include 4 beam saber handles, 2 beam saber parts, pilot figure x2 (standing, sitting), transformable V-fin x 1 , static V fin x 2 (Unicorn/Destroy).

RM213.50
RM213.50 Add to cart
[007] RG 1/144 RX-178 Gundam MK-II (Titans)
SAVERM69.70

[007] RG 1/144 RX-178 Gundam MK-II (Titans)

  • "RX-178 Gundam MK-â…¡", the legitimate successor of "RX-78 GUNDAM", appears as the eighth RG model. 
  • The newly adopted "advanced MS joints" enable to expand the range of motion. 
  • The outer armor can be attached to the frames after assembly, to enjoy the realism of building up the MS. 
  • Many gimmicks of the RG "real system" can be found such as the opening and closing of the cockpit hatch. 
  • The pipes on its backpack and behind the knees are made of real fabric cords for richer texture. 
  • Gundam MK-â…¡ (AEUG) is also released at the same time. 
  • runner x11, realistic decal x1, instruction manual x1

RM98.00
MG 1/100 RX-0 Full Armor Unicorn Gundam Ver.Ka
SAVERM218.00

MG 1/100 RX-0 Full Armor Unicorn Gundam Ver.Ka

  • Novel version [Gundam UC] The Full Armor Gundam unicorn appeared in the late Master Grade! Fukui the author said , with the cooperation of Mr. Katoki (a mechanical designer), adding new weapons to the Unicorn. A number of packed with gimmicks to reproduce the militants.?
  • Includes armed 27 ++ Beam rifle, bazooka, and hand grenades, armed supplied All nine, 27 items + + equipped with all available weapons!?
  • Armed rich, can be fitted together. Beam rifle, hyper bazooka, Grenade launcher, etc. You can even hand. In addition, hyper bazooka can be fitted to concentrate on other weapons.?
  • Hyper Beam Javelin Armed new design! New design based on the image of Mr. Fukui Javelin was hyper beam. Exposure, such as the psycho-frame, with a large number of gimmick.?
  • Backpack equipped with arms for extra frame. Inset from the bottom of the backpack Folding arm joint so crowded, you can hold firmly.?
  • Besides the shield left and right arms, the back is also equipped ships with a total of three pieces.?
  • Comes with a stand to support the huge back thrusters. In heavily armed, and well Can be displayed. - Accessories: Beam Rifle x 2, saber x 2, bazooka x 2, hand grenades x 4, Missile Launcher with Grenade Launcher x 2 x 2,3, heat saber x 4, shield x 3, Gatling Gun x 6, Hyper Beam javelin x 2, only joint action based Figures x 4, support stand thruster expression x 1, Secret Parts.
Families of Unicorn series in glance:
  • BB-360 Unicorn Gundam
  • BB-360 Unicorn (Expo Version)
  • RX-0 Unicorn Gundam 02 Banshee (MG)
  • ?
  • Unicorn Gundam 02 Banshee (Unicorn Mode)
  • [134] Unicorn Gundam 02 Banshee (Destroy Mode) (HGUC)
  • RX-0 Unicorn Gundam HD Collar +MS CAGE
  • RX-0 Unicorn Gundam Destroy Mode
  • Unicorn Gundam Destroy Mode Titanium Finish
  • RX-0 Full Armor Unicorn Gundam Ver.Ka (MG)
  • RX-0 Unicorn Gundam (MG)
  • RX-0 Unicorn Gundam Ver.Ka

RM308.00
RM308.00 Add to cart
MG 1/100  Duel Gundam Assault Shroud
SAVERM114.50

MG 1/100 Duel Gundam Assault Shroud

  • Duel Gundam Assault Shroud recreated as a Master Grade! 
  • The second in the SEED Remaster series, the Duel Gundam is designed on the versatile X100 frame system! 
  • Simple assembly provides the maximum range of motion with a minimum number of parts.
  • Completely redesigned for the Remaster series of MGs.
  • Reproduce the attachable Assault Shroud gimmick! 
  • Cockpit hatch opens and closes, and cockpit internals are detailed.
  • Yzak Joul figures included- sitting and standing
  • Designed using exclusive blueprints for this Master Grade kit. 
  • Accessories: Shield, 57mm High-Energy Rifle with 175mm Grenade Launcher,
  • Shiva 115mm Rail Gun, 250mm 5-Barrel Missile Pod, 350mm Bazooka, Saber x2

RM161.00
RM161.00 Add to cart
[R13] HG 1/144 Providence Gundam
SAVERM44.80

[R13] HG 1/144 Providence Gundam

  • Completely redesigned HG SEED Gundam series!
  • If SEED is reproduced in action pose! Joint Action Base 2 comes with new parts support.
  • Excluding some kit.
  • Comes with stickers for marking up a new dress!
  • Redesigned the packaging design!
  • Redesigned with a new color molding!

RM63.00
[139] HG 1/144 Juaggu (Unicorn Ver.)
SAVERM41.40

[139] HG 1/144 Juaggu (Unicorn Ver.)

- ジュアッグ, HGUC-izing of a shock! The time of 刻 for 30 years is exceeded, and it is full renewal!! - Reappear in the figure in which it appeared by episode4. - The canon of nose and an arm is flexibly movable. - Chest mechanical reappearance. - Pausing is also free. - MSM-04G JUAGGU (ジュアッグ) -- It was developed for jab low capture games at the time of "one-year war." Special work MS. U. In C.0096, the brave figure was shown as one corner of the attack party to federal capital Dakar. - Accessories : 3 cannons-equipped-at-a-battery canon (right and left) Item Size : 31 x 19 x 7.5 cm

RM59.50
Third Party Brand RG 1/144 MSN-04 Sazabi
SAVERM30.00

Third Party Brand RG 1/144 MSN-04 Sazabi

Third Party Brand RG 1/144 MSN-04 Sazabi

Brand : GaoGao
Grade : RG
Scale : 1/144
Model : MSN-04 Sazabi

Stand and Water Decal is included

Please note that this is non-Bandai item.

RM60.00
MG 1/100 Gundam Age-1 Titus
SAVERM93.60

MG 1/100 Gundam Age-1 Titus

Bandai MG Gundam AGE-1 Titus – Master Grade Plastic Model Kit

Unleash raw power with the MG Gundam AGE-1 Titus, a Master Grade kit that brings the heavy-hitting, close-combat mobile suit from Mobile Suit Gundam AGE to life with stunning detail and dynamic articulation. Designed for builders who love bold silhouettes and impact-driven design, the Titus delivers a commanding presence on any display shelf.

Key Features

  • Authentic Master Grade Detailing:
    Inner frame engineering allows for realistic mechanical structure, smooth posing, and impressive stability, even with its massive armor parts.

  • Powerful, Muscular Proportions:
    True to its on-screen design, the Titus features robust limbs, broad chest armor, and oversized gauntlets that emphasize its melee-specialist personality.

  • High Articulation for Dynamic Poses:
    Despite its bulk, the kit offers excellent mobility—pose it delivering heavy punches, high kicks, or mid-battle stances with ease.

  • Signature Effect Parts:
    Comes with clear effect pieces for energy-infused attacks, letting you recreate iconic moves such as the Beam Lariat and Punch Impact.

  • Color Separation & Sharp Mold Quality:
    Minimal painting required thanks to Bandai’s precise part color-coding, crisp panel lines, and clean plastic finish.

  • Customizable Build Experience:
    Includes marking stickers, decals, and extra optional parts so builders can fine-tune details to their preference.

What’s in the Box

  • MG 1/100 Gundam AGE-1 Titus runners

  • Inner frame components

  • Clear effect part sets

  • Sticker & marking decal sheet

  • Instruction manual (fully illustrated)

RM140.00
RM140.00 Add to cart
[136] HGUC 1/144 Delta Gundam
SAVERM129.50

[136] HGUC 1/144 Delta Gundam

- Appear in the game for PS3 "maneuver warfare GUNDAM UC"! The true figure of 100 formulas, formation of variable MS "delta GUNDAM" HGUC! 

- The gorgeous kit by whole body optical 輝く plating finish! - Reproduce the same golden armoring as 100 formulas by the plating part which shines. Two beam sabers besides the possibility of modification by a substitution part, a large-sized rifle, and a shield are attached, and it is also play value. バツグン! 
- It is full reappearance about a flight form (wave rider) with a substitution part! 
- An action pause is also free by the wrist part of a rich expression, and a broad movable region! 
- MSN-001 Delta GUNDAM -- Variable MS which considers the visual book "GUNDAM MS グラフィカ" as the first appearance. The figure which golden MS "100 Formula" originally aimed at. It is supposed only with design data that construction is not carried out. 
- Accessories : shield, beam rifle, and beam saber x2, the wrist for sabers (right), the wrist for rifles (right), an open hand (right and left), a grip hand (right and left) Item Size/Weight : 31.2 x 19.2 x 9 cm / 404g

RM182.00
RM182.00 Add to cart
[068] HG 1/144 MS-05 Zaku I The Black Tri-Star
SAVERM29.90

[068] HG 1/144 MS-05 Zaku I The Black Tri-Star

MS-05 Zaku I The Black Tri-Star (HGUC)

RM42.00
[064] HGUC 1/144 MS-05B Zaku I
SAVERM29.90

[064] HGUC 1/144 MS-05B Zaku I

  • Reproducible shoulder tackle.
  • Bazooka armed rack, Zakubazuka, Zaku machine gun, shield, Shutsurumu file
  • Usuto supplied, the Heat Hawk. Zakubazuka can be attached to the rear armor.
  • Mono movable by moving the lever on the back of the head.
  • The pursuit of the detail comes with a wrist.
  • The double elbow joints, expanding the range of movement

RM42.00

Showing 61 - 90 of 2757 products

Contact Us