Price Clear







Showing Gundam Parts product(s)

Showing 631 - 660 of 1216 products

img
SAVERM23.95

1/144 System Weapon 002 (Gundam Model Kits)

  • Accessories: Beam Rifle, Heat Hawk, a dedicated rack parts
  • P/S: This package only consists of accessories only, gundam model kit showed in picture is illustration of usage and exclude in this package.

RM48.00
img
SAVERM7.50

Tamiya 87135 Mark Fit (Strong) Decal Solution 40ml Bottle

【 Perfect Decal Application 】   


Mark Fit enables perfect decal applications. It softens decals so they can easily fit to uneven, rounded, and matt finish surfaces of plastic models while increasing adhesion. The bottle's cap comes with a convenient brush. 1 bottle contains 40ml.

≪How to use≫
1. Apply Mark Fit to the model where decal is applied.
2. Place decal on the model.
3. Position decal by an wetting finger.
4. Press decal down gently with a soft cloth or cotton swab until excess water is gone.
5. Apply Mark Fit over the decal, then press down gently with a soft cloth or cotton swab.
6. Allow the decal to completely dry.

RM17.50
img
SAVERM58.50

RG 1/144 Wing Gundam Zero EW for expansion effects unit

  • This is P-Bandai Japan Exclusive limited release item.
  • an wing feather effect for the gundam model kit: RG Wing Gundam Zero EW
  • RG Wing Gundam Zero EW for expansion effect "Seraphim Feather" × 10 (left and right each five)
  • Action base 3 (Black Smoke Clear) × 1
  • Display arm × set
  • This is pre-painted plastic model kits and require snap-fit assembly only.

RM90.40
img
SAVERM5.80

[WATER DECAL] MG Strike Freedom

  • water decal for 1/100 strike freedom gundam
  • not pre-cut like the bandai slide water decal.

RM12.10
img
SAVERM13.90

[Bandai] Gundam MG/HG Action Base 3 (Black)

New Action Base 3 release form Bandai with a new design that you can customize the action base with any postcard-sized photo and insert to the frame. The Action Base 3 is designed primaly for 1/144 HG and RG kit. However, the action base also suitable for SD and 1/100 scale kits.



RM26.00
img
SAVERM3.90

[Water Decal] HG Astray Red Frame Kai

  • water decal for gundam astray red frame gundam kai scale 1/144
  • not pre-cut like the bandai slide water decal.
  • extra touch of details for modeling kits.

RM9.10
img
SAVERM11.00

[Builder Parts] Non Scale MS Sight Lens 01 (Green)

[Builder Parts] Non Scale MS Sight Lens 01 (Green)


Includes:
2.5 MS Lens x 3
3.0 MS Lens x 3
3.5 MS Lens x 3
4.0 MS Lens x 3
5.5 MS Lens x 3
Seed x 3 Each

Item Suze / Weight: 25 x 17 x 1.2cm / 40g

RM18.90
img
SAVERM56.20

P-BANDAI 1/35 SCALE ZAKU II HEAD (BLACK TRI-STAR COLOR)

  • Release Date: Dec 2014
  • This is P-Bandai Japan exclusive item!
  • Gunpla head plastic model kits - the first bullet Zaku head!
  • Set include: Zaku head, rock based.
  • This is pre painted plastic model kits, require simple snap-fit assembly.

RM193.70
img
SAVERM13.97

[Bandai] MG/HG Action Base 1 Sinanju Ver.

The classic display base for all your 1/100 kits, but with a Sinanju twist! This one is cast in an intimidating combo of red and black to perfectly complement the Sinanju! Included a piece of Sinanju Sticker for extra touch up.

RM28.00
img
SAVERM13.10

[Builder Parts] 1/144 MS CANNON 01

[Builder Parts] 1/144 MS CANNON 01

Includes:
  • MS Cannon x 2
  • MS Foot Missle x 2
  • MS Grenade x 2
Item Size / Weight: 25.1 x 16.3 x 2 cm / 50g

RM22.80
img
SAVERM17.90

[Third Party] RG 1/144 Strike Freedom Effect Unit Wing of Skies Exclusive Expansion Set with Action Base 2

- This is the expansion effect unit sets for RG Strike Freedom
- The set contains x4 Wings (left and right wing) and Action Base 2 (Dark Clear Ver.) x1.
- Wing of Skies containt varios color and it can reproduce various color effect!
- This is pre-painted plastic model kits and require snap-fit assembly only.
- RG strike Freedom Gundam is not included in this package and sold seperately.
- THIS IS NON-BANDAI PRODUCT.

RM42.00

P-Bandai: PG 1/60 Unicorn Gundam Full Armor Expansion Unit Set

This is just an optional set of Full armor units for PG Unicorn Gundam, which sold separately here.

Full armor unit include:
  • beam Gatling gun x 4
  • Hyper-bazooka x 1
  • Hand-grenade unit x 8
  • grenade launcher x 2
  • 3 twin missile launcher x 2
  • shield x 2
  • large thrusters x 2
  • Decal
This is pre-painted plastic model kits and require snap-fit assembly only

RM420.00
img
SAVERM9.90

[Builder Parts] MS Sight Lens 01 (Pink)

[Builder Parts] MS Sight Lens 01 (Pink)


Includes:
2.5 MS Lens x 3
3.0 MS Lens x 3
3.5 MS Lens x 3
4.0 MS Lens x 3
5.5 MS Lens x 3
Seed x 3 Each

Item Suze / Weight: 25 x 17 x 1.2cm / 40g

RM20.00
img
SAVERM20.90

RG Strike Freedom Wing of Light (Wing Accessories)

  • This package contains 'light' wing effect for 1/144 RG strike freedom gundam only.
  • RG 1/144 Strike Freedom Gundam is not included in this package and sold seperately.
  • Initial released comes with 8 pieces of Dragoon effects in the package.
  • THIS IS NON-BANDAI PRODUCT.

RM12.00
img
SAVERM13.28

[Builder Parts] Non Scale MS Thruster 01

Product details: A basic type × 2 (small), basic type A × 2 (large), basic type B × 2 (small), Basic type B × 2 (large), Horizontal type × 2 (small), type Horizontal × 2 (large), round type × 2 (small), Round type × 2 (large)

RM22.70
img
SAVERM13.97

[Bandai] MG/HG Action Base 1 Unicorn Ver.

The classic display base for all your 1/100 kits, but with a Unicorn twist! This one is cast in an intimidating combo of white and black to perfectly complement the Unicorn Gundam! Included a piece of Unicorn Sticker for extra touch up.

RM28.00
img
SAVERM7.90

[Bandai] MG/HG Action Base 1 Zeon Ver.

Original Bandai Action Base

Yellow base is molded in the shape of the Zeon insignia. 
Base arm is shorter than the standard model. 
Designed for the MS-06 Zaku II and other Zeon units. 
Suitable for SD, HG and MG Gunpla, assemble required.


RM40.00
img
SAVERM11.00

[Builder Parts] MS Blade 01

    Comes with
  • 3 different types of Rod Blades (Big and Small, 2 each)
  • 4 different types of Blade Fins (Big and Small, 2 each)
  • 6 different types of Blade Antennas (Big and Small, 2 each)

RM18.90
img
SAVERM11.00

[Builder Parts] MS Panel 01

  • Accessories: × 2 six large size, × 2 seed in size 6, × 2 six small size

RM18.90
img
SAVERM11.08

[Builder Parts] MS Emblem Relief 01

[Builder Parts] MS Emblem Relief 01

Comes with Zeon and Federation Emblem

Includes:
  •  Large Emblem x 3
  • Medium Emblem x 3
  • Small Emblem x 3
Item Size / Weight : 25.5 x 17 x 1 / 40g

RM18.90
img
SAVERM24.90

1/144 System Weapon 001 (Gundam Model Kits)

- Start the fun part for further expansion Gundam series!
- By releasing a variety of extension parts, and propose modifications to exhibit examples of Gundam! The Gundam
Rent on the experience gained, the Gundam world, assembling a kit of Gundam and made
The new brand for the enjoyment of the game spread further.
- First in some pre-assembled kit system Weapon series.
- Dedicated rack accessories!
- Parts can be supplied with variation in recombination?
- Beam Gatling Gun ... type proximity type fire suppression, type of assistance
Early-type Zaku machine gun machine gun. -   Mounting Type antiaircraft ammunition magazine, late-type machine gun

RM48.00
img
SAVERM13.28

[Builder Parts] MS Tank 01

  • Product details: tank × 2 (small), tank × 2 (large)
  • suitable for 1/144 scale

RM22.70
img
SAVERM19.90

Expansion Feathers Effect and Dedicated Base for RG HG 1/144 Wing Gundam Zero EW

Expansion Feathers Effect and Dedicated Base for 1/144 scale Wing Gundam Zero EW


Package contain : 
  • 10 pieces of white pearl color features
  • Dedicated base with illustration
  • For HG or RG 1/144 scale
This is pre-painted plastic model kits part and require snap-fit assembly only

RM40.00
img
SAVERM5.80

[Water Decal] RG Gundam 00 Raiser

  • water decal for 00 RAISER model kit scale 1/144.
  • not pre-cut like the bandai slide water decal.

RM12.10
img
SAVERM5.80

[Water Decal] RG ZGMF-X20A STRIKE FREEDOM Model Kit

  • Third Party Water decal for RG Strike Freedom model kit scale 1/144.

RM12.10
img
SAVERM5.80

[Water Decal] RG WING ZERO EW Model Kit

  • water decal for RG Wing Zero EW model kit scale 1/144.
  • not pre-cut like the bandai slide water decal.
  • It's recommended to use this tool when working on decalling: Cutting Matt, Tweezer, Empty swallow bottle with water, hobby k-nife, softening solution.
  • Apply a clear gloss surface before applying decal would be a good choice.

RM12.10
img
SAVERM11.00

PG Strike Freedom model kit gold color decal

  • Gold color decal for PG Strike Freedom Gundam Model kit.
  • Not pre-cut like the bandai slide water decal.
  • Extra touch of details for modeling kit

RM18.90
img
SAVERM13.28

[Builder Parts] MS Radome 01 (Gundam Model Kits)

  • Accessories: × 4 2 large seed size, × 4 in size two, × 4 two small size

RM22.70
img
SAVERM25.95

1/144 System Weapon 008 (Gundam Model Kits)

  • Accessories: Hyper Mega Launcher, Hyper Mega Launcher for customized parts, beam spray gun, beam spray gun for customized parts, racks, hand parts × 6.
  • P/S: This package only consists of accessories only, gundam model kit showed in picture is illustration of usage and exclude in this package.

RM52.00
img
SAVERM26.55

1/144 System Weapon 004 (Gundam Model Kits)

  • Accessories: Long-range beam rifle, sword Heat (Gouf custom type), rack-only parts
  • P/S: This package only consists of accessories only, gundam model kit showed in picture is illustration of usage and exclude in this package.

RM45.40

Showing 631 - 660 of 1216 products